Yes, as i know, ST-Link support STM32 and STM8 only, by providing high level function for debugging. But the protocol is not available.
Check mspgcc, there is a gdbproxy supporting MSP430FET tools. If there is a similar mechanism in OpenOCD, it will be very easy to support ST-Link. 2010/3/23 Spencer Oliver <s...@spen-soft.co.uk> > On 23/03/2010 10:12, simon qian wrote: > >> ST doesn't open the protocol of ST-Link, so it's impossible to support >> it in OpenOCD. >> I have 2 ST-Link sent by vendor of ST, but now, they are Versaloon. >> >> > ST sent me the api, it is based on mass storage device. > They are happy for openocd to support it. > > The current issue is that it is high level access only, eg. > Step Core, Read registers etc. So some changes are required to support this > kind of dongle. > > Cheers > Spen > -- Best Regards, SimonQian http://www.SimonQian.com
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
