On 10 August 2011 07:11, Steve Bennett <ste...@workware.net.au> wrote: > On 10/08/2011, at 3:03 PM, Xiaofan Chen wrote: > >> On Wed, Aug 10, 2011 at 11:44 AM, Steve Bennett <ste...@workware.net.au> >> wrote: >>> On 10/08/2011, at 9:43 AM, Xiaofan Chen wrote: >>>> It was not up to date but very close. Anyway, I just updated it and >>>> the issue is still there with the release zip file. I will try the git >>>> tree later. >>>> >>>> === configuring in jimtcl >>>> (/cygdrive/d/work/openocd/openocd-0.5.0/build_mingw_cr >>>> oss/jimtcl) >>>> configure: running /bin/sh ../../jimtcl/configure.gnu >>>> --disable-option-checking >>>> '--prefix=/usr/local' '--build=i686-pc-mingw32' '--enable-jlink' >>>> '--enable-ft22 >>>> 32_libftdi' 'build_alias=i686-pc-mingw32' --cache-file=/dev/null >>>> --srcdir=../../ >>>> jimtcl >>>> ../../jimtcl/configure: line 3: >>>> D:/work/openocd/openocd-0.5.0/jimtcl/autosetup/j >>>> : No such file or directory >>>> ../../jimtcl/configure: line 3: exec: >>>> D:/work/openocd/openocd-0.5.0/jimtcl/autos >>>> : cannot execute: No such file or directory >>>> configure: error: ../../jimtcl/configure.gnu failed for jimtcl >>> >>> You have something weird going on there. Note how the lines are truncated. >>> For example: >>> >>>> ../../jimtcl/configure: line 3: >>>> D:/work/openocd/openocd-0.5.0/jimtcl/autosetup/j >>>> : No such file or directory >> >> Yes I agree that the error message is quite strange. It is directly copy >> and paste from the Cygwin prompt. I will check again. >> >> The other errors under MinGW are also quite strange. I think I will >> try another setup. > > Let us know how that goes. > >> >>> Or is that your cut and paste of the error messages? >>> If so, please add the errors as an attachment instead. >>> >>> FYI: I build the release tarball on windows/mingw without any problems. >> >> Glad to know that. As per the previous answer from Spen that >> MinGW/Msys is not supported by jimtcl. Is that not true? > > That is *not* true. > The version of jimtcl in openocd-0.5.0 fully supports building on mingw/msys >
for me jimtcl has never built under msys since the update. log is attached below, for info jimsh0.exe is built ok. No installed jimsh or tclsh, building local bootstrap jimsh0 The system cannot find the path specified. autosetup/system.tcl:150: Error: in procedure 'use' called at file "auto.def", line 5 in procedure 'use' called at file "autosetup/cc.tcl", line 29 in procedure 'config_guess' called at file "autosetup/system.tcl", line 150 Try: 'configure --debug' for a full stack trace configure: error: ./configure.gnu failed for jimtcl Cheers Spen _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
