On 10/08/2011, at 6:39 PM, Spencer Oliver wrote: > On 10 August 2011 07:11, Steve Bennett <ste...@workware.net.au> wrote: >> On 10/08/2011, at 3:03 PM, Xiaofan Chen wrote: >> >>> On Wed, Aug 10, 2011 at 11:44 AM, Steve Bennett <ste...@workware.net.au> >>> wrote: >>>> On 10/08/2011, at 9:43 AM, Xiaofan Chen wrote: >>>>> It was not up to date but very close. Anyway, I just updated it and >>>>> the issue is still there with the release zip file. I will try the git >>>>> tree later. >>>>> >>>>> === configuring in jimtcl >>>>> (/cygdrive/d/work/openocd/openocd-0.5.0/build_mingw_cr >>>>> oss/jimtcl) >>>>> configure: running /bin/sh ../../jimtcl/configure.gnu >>>>> --disable-option-checking >>>>> '--prefix=/usr/local' '--build=i686-pc-mingw32' '--enable-jlink' >>>>> '--enable-ft22 >>>>> 32_libftdi' 'build_alias=i686-pc-mingw32' --cache-file=/dev/null >>>>> --srcdir=../../ >>>>> jimtcl >>>>> ../../jimtcl/configure: line 3: >>>>> D:/work/openocd/openocd-0.5.0/jimtcl/autosetup/j >>>>> : No such file or directory >>>>> ../../jimtcl/configure: line 3: exec: >>>>> D:/work/openocd/openocd-0.5.0/jimtcl/autos >>>>> : cannot execute: No such file or directory >>>>> configure: error: ../../jimtcl/configure.gnu failed for jimtcl >>>> >>>> You have something weird going on there. Note how the lines are truncated. >>>> For example: >>>> >>>>> ../../jimtcl/configure: line 3: >>>>> D:/work/openocd/openocd-0.5.0/jimtcl/autosetup/j >>>>> : No such file or directory >>> >>> Yes I agree that the error message is quite strange. It is directly copy >>> and paste from the Cygwin prompt. I will check again. >>> >>> The other errors under MinGW are also quite strange. I think I will >>> try another setup. >> >> Let us know how that goes. >> >>> >>>> Or is that your cut and paste of the error messages? >>>> If so, please add the errors as an attachment instead. >>>> >>>> FYI: I build the release tarball on windows/mingw without any problems. >>> >>> Glad to know that. As per the previous answer from Spen that >>> MinGW/Msys is not supported by jimtcl. Is that not true? >> >> That is *not* true. >> The version of jimtcl in openocd-0.5.0 fully supports building on mingw/msys >> > > for me jimtcl has never built under msys since the update. > log is attached below, for info jimsh0.exe is built ok. > > No installed jimsh or tclsh, building local bootstrap jimsh0 > The system cannot find the path specified. > autosetup/system.tcl:150: Error: > in procedure 'use' called at file "auto.def", line 5 > in procedure 'use' called at file "autosetup/cc.tcl", line 29 > in procedure 'config_guess' called at file "autosetup/system.tcl", line 150 > Try: 'configure --debug' for a full stack trace > configure: error: ./configure.gnu failed for jimtcl
It is failing while trying to run config.guess. What do you get when you run: sh jimtcl/autosetup/config.guess -- µWeb: Embedded Web Framework - http://uweb.workware.net.au/ WorkWare Systems Pty Ltd W: www.workware.net.au P: +61 434 921 300 E: ste...@workware.net.au F: +61 7 3391 6002 _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
