If I use this command I get the next response: SW1 = 6D and SW2 = 00, and
its meaning is that "Instruction code not supported or invalid". There is
anything wrong? Can you explain to my how is the process to deauthenticate.
Thank you
On Thu, Feb 23, 2012 at 4:00 PM, evalues evalues <evalues...@gmail.com>wrote:
> The code would be as shown bellow:
>
> sc_apdu_t apdu;
> const u8 mf_buf[4] = {0x00, 0x00, 0x00, 0x01};
> sc_format_apdu(card, &apdu, SC_APDU_CASE_3_SHORT, 0x28, 0x01, 0x00);
> apdu.le = 0;
> apdu.lc = 4;
> apdu.data = mf_buf;
> apdu.datalen = 4;
> apdu.resplen = 0;
>
> r = sc_transmit_apdu(card, &apdu);
>
> Thank you.
>
>
>
> On Fri, Feb 17, 2012 at 10:37 AM, Viktor Tarasov <viktor.tara...@gmail.com
> > wrote:
>
>>
>>
>> On Wed, Feb 8, 2012 at 6:04 PM, evalues evalues <evalues...@gmail.com>wrote:
>>
>>> Hello,
>>>
>>> thanks for your answer. I'm working with Athena smartcard and I have
>>> seen that in the file card-asepcos.c, the function of logout is not
>>> implemented. I have seen in the file card-starcos.c that it have this
>>> function, and I have seen that the function is to send a certain APDU to
>>> the smartcard. I want know if it is possible to do the logout function for
>>> athena smartcard and the APDU that I should use.
>>>
>>
>>
>> Athena card has a proprietary APDU to reset the PIN's 'verified' flag:
>>
>> > Asepcos cards have a Clear Security Status command - it is encoded as
>> > following:
>> > 80 28 01 00 Lc <data>
>> > Where <data> is 4 bytes: 00, <level>, <MSByte of pin's FID>, <LSByte of
>> > pin's FID>
>> > <level> is the directory depth of the pin's location - e.g., 0 for a pin
>> > in the MF, 1 for a pin in a DF under the MF, etc.
>>
>> > For example, to clear the status of the pin with FID=1 under the MF, use
>> > the following apdu:
>> > 80 28 01 00 04 00 00 00 01
>>
>>
>>
>>> Thank you.
>>>
>>
>> Kind regards,
>> Viktor.
>>
>>
>>
>>
>>> On Sun, Jan 29, 2012 at 8:08 PM, Viktor Tarasov <
>>> viktor.tara...@gmail.com> wrote:
>>>
>>>> Hello,
>>>>
>>>> Le 25/01/2012 11:45, evalues evalues a écrit :
>>>> > Hello,
>>>> >
>>>> > I need know if at Opensc (opensc.dll version 0.12.1.0) there is a
>>>> pkcs15-function that allows me to deauthenticate on a smart card. For
>>>> example, I was looking the source code of this opensc version, and I found
>>>> that in the file minidriver.c there is a
>>>> > function (CardAuthenticatePin) that uses the function
>>>> sc_pkcs15_verify_pin for check if the PIN is correct, and if so
>>>> authenticate the user on the smartcard. Besides, I was looking the function
>>>> CaredDeauthenticate, but I did not find a pkcs15-funtion for
>>>> > deauthenticate, does it exist? If it exist, what is?
>>>>
>>>> Not all the cards natively support the 'deauthenticate' function.
>>>> There is no such function in the OpenSC pkcs15 API.
>>>> In libopensc API there is the sc_logout() one, that calls the card
>>>> specific 'logout' handler, if this last one is implemented.
>>>>
>>>> >
>>>> > Also, I want know if there is an API of pkcs15-function.
>>>> > Thank you.
>>>>
>>>> Kind regards,
>>>> Viktor.
>>>>
>>>
>>>
>>
>
_______________________________________________
opensc-devel mailing list
opensc-devel@lists.opensc-project.org
http://www.opensc-project.org/mailman/listinfo/opensc-devel
