Daniel Rock schrieb:
Hi,
I try to install Solaris on a new machine. This machine contains an
> IDE controller with some Host-RAID controller - besides that you
> normally can still access the controller as a plain old IDE controller.
PCI class 01-04-00 (Mass storage RAID controller)
instead of
PCI class 01-01-00 (Mass storage IDE controller)
I have patched the pci_autoconfig kernel module, so that it also accepts
pciclass,0104 as a valid PCI IDE driver.
http://cvs.opensolaris.org/source/xref/on/usr/src/uts/i86pc/io/pci/pci_boot.c#is_pciide
With this modification the system boots and is able to see at least one of the
two disks attached to the SATA controller:
IDE device at targ 0, lun 0 lastlun 0x0
model ExcelStor Technology J880S
ATA/ATAPI-7 supported, majver 0xfc minver 0x1a
PCI-device: [EMAIL PROTECTED], ata0
ata0 is /[EMAIL PROTECTED],0/pci1166,[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED]
UltraDMA mode 5 selected
Disk0: <Vendor 'Gen-ATA ' Product 'ExcelStor Techno'>
pci-ide, instance #0
Driver properties:
name='class-code' type=int items=1 dev=none
value=00010485
Hardware properties:
name='#size-cells' type=int items=1
value=00000000
name='#address-cells' type=int items=1
value=00000001
name='device_type' type=string items=1
value='pci-ide'
[...]
name='compatible' type=string items=7
value='pci1166,240.1166.24a.0' +
pci1166,240.1166.24a' + 'pci1166,24a' + 'pci1166,240.0' + 'pci1166,240' +
'pciclass,010400' + 'pciclass,0104'
name='model' type=string items=1
value='RAID controller'
[...]
ide, instance #0
System software properties:
name='device_type' type=string items=1
value='ide'
name='flow_control' type=string items=1
value='dmult'
name='queue' type=string items=1
value='qfifo'
name='max_transfer' type=int items=1
value=00000100
name='ata-options' type=int items=1
value=00000001
[...]
ide (driver not attached)
Hardware properties:
name='reg' type=int items=1
value=00000001
But attached are two disks (below are the boot messages of a Linux boot - but
I want to get rid of Linux):
Loading sata_svw
ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 11 (level, low) -> IRQ 11
ata1: SATA max UDMA/133 cmd 0xFFFFC20000004000 ctl 0xFFFFC20000004020 bmdma
0xFFFFC20000004030 irq 11
ata2: SATA max UDMA/133 cmd 0xFFFFC20000004100 ctl 0xFFFFC20000004120 bmdma
0xFFFFC20000004130 irq 11
ata3: SATA max UDMA/133 cmd 0xFFFFC20000004200 ctl 0xFFFFC20000004220 bmdma
0xFFFFC20000004230 irq 11
ata4: SATA max UDMA/133 cmd 0xFFFFC20000004300 ctl 0xFFFFC20000004320 bmdma
0xFFFFC20000004330 irq 11
ata1: dev 0 ATA, max UDMA/133, 160836480 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_svw
ata2: dev 0 ATA, max UDMA/133, 160836480 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_svw
ata3: no device found (phy stat 00000004)
scsi2 : sata_svw
ata4: no device found (phy stat 00000004)
scsi3 : sata_svw
Vendor: ATA Model: ExcelStor Techno Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sda2: <solaris: [s0] sda5 [s2] sda6 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: ATA Model: ExcelStor Techno Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 160836480 512-byte hdwr sectors (82348 MB)
SCSI device sdb: drive cache: write back
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
SCSI device sdb: 160836480 512-byte hdwr sectors (82348 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
sdb2: <solaris: [s0] sdb5 [s2] sdb6 >
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
Any more ideas?
Daniel
_______________________________________________
opensolaris-discuss mailing list
opensolaris-discuss@opensolaris.org
