I had the same error, change the slice 5 partition and I then able to create a
zfs, one cyl might dot he trick but not sure now, it is in use with snv_b83a.
Total disk cylinders available: 50988 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 3080 - 4099 7.81GB (1020/0/0) 16386300
1 swap wu 3 - 1022 7.81GB (1020/0/0) 16386300
2 backup wm 0 - 50987 390.59GB (50988/0/0) 819122220
3 unassigned wm 2060 - 3079 7.81GB (1020/0/0) 16386300
4 unassigned wm 1040 - 2059 7.81GB (1020/0/0) 16386300
5 unassigned wm 4100 - 50833 358.00GB (46734/0/0) 750781710
6 unassigned wm 1033 - 1039 54.91MB (7/0/0) 112455
7 unassigned wm 1026 - 1032 54.91MB (7/0/0) 112455
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 alternates wu 1 - 2 15.69MB (2/0/0) 32130
partition>
bash-3.00# zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
zones 356G 3.67G 352G 1% ONLINE -
bash-3.00# zpool status -v
pool: zones
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
zones ONLINE 0 0 0
c3d0s5 ONLINE 0 0 0
errors: No known data errors
bash-3.00#
This message posted from opensolaris.org
