1) Not really sure what difference between lo0 and bcme0 is. lo0 is the 'loopback' interface
bcme0 is your ethernet port. so you have a driver and a port. 2) Not sure why DHCP isn't giving me an address there ahs to be a description of your networking equipment/ provider type. do you ahve dual boot setup ie windows or linux? if so boot in and wirte down the netork info from control panel or ifconfig 3) no idea how to configure DHCP on opensolaris end if I need to shoudl not need to . may however need to configure a dhcp server ie the router or other device on local network 4) no idea how to configure manually if I want to set a static address yes but we need to know what you network numbers are for your local network .....but opensolaris is still very much a mystery. nah, linux is pretty similar and the manual config files are all in the /etc directory /etc/hosts /etc/netmask /etc/hostname.[interface] <----- must correlate to your ethernet card driver /etc/defaultrouter /etc/nodename /etc/resolv.conf /etc/nsswitch.conf hope this helps, uhh hoep i dint forget any of them har SGK This message posted from opensolaris.org
