I have been having some trouble with Jumpstart and FTP. On the jumpstart, the
jumpstart starts and hangs. If I change the mtu settings on the nic to 1496,
it will start and run for a while and then hang. Without changing the mtu
settings on the NIC, I'm unable to ftp. does anyone have any idea how to
correct this issue?
Here's the release info:
root at truman:/root-> cat /etc/release
Solaris Express Community Edition snv_91 X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 03 June 2008
root at truman:/root->
Current network settings on the Jumpstart Server:
root at truman:/root-> ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=201000863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,IPv4,CoS>
mtu 1500 index 25
inet 192.168.1.15 netmask ffffff00 broadcast 192.168.1.255
ether 0:15:b7:47:1e:e9
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
root at truman:/root->
The jumpstart hangs on the client:
Rebooting with command: boot net -v install
Boot device: /pci at 1f,4000/network at 1,1 File and args: -v install
Using Onboard Transceiver - Link Up.
38e00
Server IP address: 192.168.1.15
Client IP address: 192.168.1.160
Using Onboard Transceiver - Link Up.
Using RARP/BOOTPARAMS...
Internet address is: 192.168.1.160
hostname: mju60
Found 192.168.1.15 @ 0:15:b7:47:1e:e9
root server: truman-e1000g0 (192.168.1.15)
root directory: /export/jumpstart/sol10_u5_sparc/Solaris_10/Tools/Boot
Size:
root at truman:/root-> ifconfig e1000g0 down ; ifconfig e1000g0 mtu 1496;
ifconfig e1000g0 up;
root at truman:/root-> ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
e1000g0:
flags=1201000863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,IPv4,CoS,FIXEDMTU>
mtu 1496 index 25
inet 192.168.1.15 netmask ffffff00 broadcast 192.168.1.255
ether 0:15:b7:47:1e:e9
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
root at truman:/root->
#########################################
After changing the mtu settings to 1496, the jumpstart goes further but it
still hangs. Also, ftp doesn't work unless I change the mtu settings to 1496:
Rebooting with command: boot net -v install
Boot device: /pci at 1f,4000/network at 1,1 File and args: -v install
Using Onboard Transceiver - Link Up.
38e00
Server IP address: 192.168.1.15
Client IP address: 192.168.1.160
Using Onboard Transceiver - Link Up.
Using RARP/BOOTPARAMS...
Internet address is: 192.168.1.160
hostname: mju60
Found 192.168.1.15 @ 0:15:b7:47:1e:e9
root server: truman-e1000g0 (192.168.1.15)
root directory: /export/jumpstart/sol10_u5_sparc/Solaris_10/Tools/Boot
Size: 0x872d0+0x1da99+0x44863 Bytes
krtld: Unused kernel arguments: `install'.
module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x10872cf] data
at 0x1800000
module misc/sparcv9/krtld: text at [0x10872d0, 0x10a17ef] data at 0x1862300
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10a17f0, 0x121272f]
data at 0x1868180
module /platform/sun4u/kernel/misc/sparcv9/platmod: text at [0x1212730,
0x1212737] data at 0x18beb48
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-II: text at
[0x1212740, 0x121eb07] data at 0x18bf280
SunOS Release 5.10 Version Generic_127127-11 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
os-io Ethernet address = 8:0:20:e3:c:f3
Using default device instance data
mem = 786432K (0x30000000)
avail mem = 770678784
root nexus = (2 X UltraSPARC-II 296MHz)
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
pseudo-device: dld0
dld0 is /pseudo/dld at 0
pcipsy0 at root: UPA 0x1f 0x4000
pcipsy0 is /pci at 1f,4000
SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
PCI-device: network at 1,1, hme0
hme0 is /pci at 1f,4000/network at 1,1
Requesting Internet address for 8:0:20:e3:c:f3
Found my IP address: c0a801a0 (192.168.1.160)
hostname: mju60
whoami: no domain name
root on truman-e1000g0:/export/jumpstart/sol10_u5_sparc/Solaris_10/Tools/Boot
fstype nfsdyn
PCI-device: ebus at 1, ebus0
ebus0 is /pci at 1f,4000/ebus at 1
se0 at ebus0: offset 14,400000
se0 is /pci at 1f,4000/ebus at 1/se at 14,400000
su0 at ebus0: offset 14,3083f8
su0 is /pci at 1f,4000/ebus at 1/su at 14,3083f8
su1 at ebus0: offset 14,3062f8
su1 is /pci at 1f,4000/ebus at 1/su at 14,3062f8
cpu0: UltraSPARC-II (portid 0 impl 0x11 ver 0x20 clock 296 MHz)
cpu2: UltraSPARC-II (portid 2 impl 0x11 ver 0x20 clock 296 MHz)
~Type 'go' to resume
{0} ok
############################################
Any ideas how to get this to work?
This message posted from opensolaris.org
