> Hi all-- > > I posted about this some months ago and wanted to try > again. I am trying to install Solaris 10 x86 (08/07) > onto a SuperMicro H8SSL-i motherboard. At first I > thought my problem might be lack of support for the > HT1000 chipset, but that doesn't seem to be it.
Go into the bios and select a different IDE mode if you can for your SuperMicro H8SSL-i motherboard, > The > Install Check Tool CD (1.3) seems to recognize the > bus and IDE devices fine. But first it gives me the > same error I get when I try to install: > > WARNING: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED] (ata0): > timeout: abort request, target=0 lun=0 > WARNING: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED] (ata0): > timeout: abort device, target=0 lun=0 > WARNING: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED] (ata0): > timeout: reset target, target=0 lun=0 > WARNING: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED] (ata0): > timeout: reset bus, target=0 lun=0 > > I've tried pulling out the hard drive I had on the > IDE (PATA) bus, as well as change the cable and > optical drive to a different unit. But, same > results. Any ideas??? any help appreciated. thanks! > > Message was edited by: > mbw725 > s SuperMicro, not ServerWorks (chipset) also try a older or different HD if you have one. This message posted from opensolaris.org _______________________________________________ opensolaris-help mailing list [email protected]
