Call off the dogs.... It looks like I have a cabling problem. I was able to get it to negotiate 1G by putting the switch right next to the interface via a short cable. So this is not a driver problem after all.....
> I have just installed build 134 on a ASUS M4A785T-M > > I can not for the life of me get the rge0 interface > to negotiate to 1000mps. It always comes up as 100mps > full duplex. I have tried two different switches - > and I have other computers on those switches that > come up as 1000mps. > > It appears as if the driver does not support this. Do > I need a new driver? > > I have tried: > > ndd -set /dev/rge0 adv_1000fdx_cap 1 > > - which has no effect > > and: > dladm set-linkprop -p en_1000fdx_cap=1 rge0 > > which reports the operation is not supported. The > driver does not appear to advertise 1000? Here is > the output of dladm show-linkprops rge0 > > LINK PROPERTY PERM VALUE > DEFAULT POSSIBLE > speed r- 100 100 > -- > autopush -- -- -- > -- > zone rw -- -- -- > > rge0 duplex r- full full > half,full > state r- up up > up,down > mtu r- 1500 1500 > 1500 > maxbw rw -- -- > -- > cpus rw -- -- -- > > rge0 priority rw high high > low,medium,high > tagmode rw vlanonly vlanonly > normal,vlanonly > forward rw 1 1 > 1,0 > default_tag rw 1 1 -- > > rge0 learn_limit rw 1000 1000 > -- > learn_decay rw 200 200 > -- > stp rw 1 1 > 1,0 > tp_priority rw 128 128 -- > > rge0 stp_cost rw auto auto > -- > stp_edge rw 1 1 > 1,0 > stp_p2p rw auto auto > true,false,auto > stp_mcheck rw 0 0 > 1,0 > protection rw -- -- > mac-nospoof, > > p-nospoof, > > estricted > rge0 allowed-ips rw -- -- > -- > ce appreciated > > Thanks > > Warren -- This message posted from opensolaris.org _______________________________________________ opensolaris-help mailing list opensolaris-help@opensolaris.org
