sorry it's very strange that I can't receive any mail with [neutron] tag, but [nova] is ok. So I just find reply thread from archives.
So, will this additional port and vxlan tunnel be the same concept I've mentioned as "interconnect network"? It should works, but bring another question: if CN has no vxlan provider network configed in neutron.conf(only vlan provider is used), will it mean that I can't use DVR snat? Also, another gw ip is occupied, it seems a little strange for user. Here is another idea: can we let the central NN snat use DVR logical mac? Then we can config each CN router's next hop to NN snat out from the device where it received packet, with next hop ip can also be the gw interface ip(no need for second ip), if we delete all gw interface ip from all DVR router's local table. I've done test in sles sp2, and it works! ============================================= Vivek, CN to NN Vxlan tunnel is something user/customer configured ? Or DVR is mandating this VxLan tunnel to reach from NN from CN ? Means the packets are encapsulated over network even they are not mandated to do so ? Then there should be standard if something is getting done like this. Thanks & regards, Keshava.A -----Original Message----- From: Narasimhan, Vivekanandan Sent: Friday, May 23, 2014 2:49 AM To: A, Keshava; OpenStack Development Mailing List (not for usage questions); Carl Baldwin Cc: Grover, Rajeev Subject: RE: [openstack-dev] [Neutron] Default routes to SNAT gateway in DVR Keshava, Tunneled over to network node means: OVS VXLAN Tunnel will be established between compute node and network node and packets will flow through that OVS VXLAN Tunnel. NAT'ing and tunneling are not related here. NAT'ing happens in network node. Packets that need to reach the external network will be tunneled to NN where SNAT'ing puts them onto external network. -- Thanks, Vivek -----Original Message----- From: A, Keshava Sent: Friday, May 23, 2014 1:11 PM To: OpenStack Development Mailing List (not for usage questions); Carl Baldwin Cc: Narasimhan, Vivekanandan; Grover, Rajeev; A, Keshava Subject: RE: [openstack-dev] [Neutron] Default routes to SNAT gateway in DVR Hi, I have one basic question, what is this tunneled over to network node means ? (" At this point, the packet will go back out to br-int and but tunneled over to the network node just like any other intra-network traffic.") What kind of tunnel between Compute to Network Node during SNAT ? Why tunneling will happen during NAT ? Thanks & regards, Keshava.A -----Original Message----- From: Carl Baldwin [mailto:carl at ecbaldwin.net<http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>] Sent: Thursday, May 22, 2014 3:27 PM To: OpenStack Development Mailing List (not for usage questions) Subject: Re: [openstack-dev] [Neutron] Default routes to SNAT gateway in DVR Hi, I found this message in my backlog from when I was at the summit. Sorry for the delay in responding. The "default SNAT" or "dynamic SNAT" use case is one of the last details being worked in the DVR subteam. That may be why you do not see any code around this in the patches that have been submitted. Outbound traffic that will use this SNAT address will first enter the IR on the compute host. In the IR, it will not match against any of the static SNAT addresses for floating IPs. At that point the packet will be redirected to another port belonging to the central component of the DVR. This port has an IP address different from the default gateway address (e.g. 192.168.1.2 instead of 192.168.1.1). At this point, the packet will go back out to br-int and but tunneled over to the network node just like any other intra-network traffic. Once the packet hits the central component of the DVR on the network node it will be processed very much like default SNAT traffic is processed in the current Neutron implementation. Another "interconnect subnet" should not be needed here and would be overkill. I hope this helps. Let me know if you have any questions. Carl On Fri, May 16, 2014 at 1:57 AM, Wuhongning <wuhongning at huawei.com<http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev>> wrote: > Hi DVRers, > > I didn't see any detail documents or source code on how to deal with > routing packet from DVR node to SNAT gw node. If the routing table see > a outside ip, it should be matched with a default route, so for the > next hop, which interface will it select? > > Maybe another standalone "interconnect subnet" per DVR is needed, > which connect each DVR node and optionally, the SNAT gw node. For > packets from dvr > node->snat node, the interconnect subnet act as the "default route" > node->for this > host, and the next hop will be the snat node. >
_______________________________________________ OpenStack-dev mailing list OpenStack-dev@lists.openstack.org http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev