On 07.08.2013, at 14:16, Guillaume Gardet wrote: > Hi, > > some updates below: > > > Le 05/08/2013 16:35, Guillaume Gardet a écrit : >> Hi, >> >> I tested beagle image from factory (but this problem should occur on all >> other boards) and it does not boot at all, with this message: >> ************************************************************ >> U-Boot SPL 2013.04 (May 28 2013 - 14:13:22) >> OMAP SD/MMC: 0 >> spl: error reading image u-boot.bin, err - -1 >> ### ERROR ### Please RESET the board ### >> ************************************************************ >> >> First problem is in BOOT partition, all available files are under a boot/ >> folder and nothing at the root of the partition. > > > Still need to be fixed. Any kiwi update which could have broken things? > Marcus? > Previously we had files in the root of the partition but also in the boot/ > folder. > > I think first partition should be mounted in /boot entry of 2nd partition > (main FS). Was it the case previously, or not? Alex?
Yes, the first partition is /boot in fstab. > > >> When u-boot want to run load_fdt for non device tree board, it tries to run >> 1. Which is wrong but should not be fatal. > > Fixed. This was on purpose. 1 is "true", so it's a command that simply gives us a good error code. Alex -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
