On 14.08.2013, at 14:22, Guillaume Gardet wrote: > > Le 14/08/2013 13:51, Alexander Graf a écrit : >> On 07.08.2013, at 14:16, Guillaume Gardet wrote: >> >>> Hi, >>> >>> some updates below: >>> >>> >>> Le 05/08/2013 16:35, Guillaume Gardet a écrit : >>>> Hi, >>>> >>>> I tested beagle image from factory (but this problem should occur on all >>>> other boards) and it does not boot at all, with this message: >>>> ************************************************************ >>>> U-Boot SPL 2013.04 (May 28 2013 - 14:13:22) >>>> OMAP SD/MMC: 0 >>>> spl: error reading image u-boot.bin, err - -1 >>>> ### ERROR ### Please RESET the board ### >>>> ************************************************************ >>>> >>>> First problem is in BOOT partition, all available files are under a boot/ >>>> folder and nothing at the root of the partition. >>> >>> Still need to be fixed. Any kiwi update which could have broken things? >>> Marcus? >>> Previously we had files in the root of the partition but also in the boot/ >>> folder. >>> >>> I think first partition should be mounted in /boot entry of 2nd partition >>> (main FS). Was it the case previously, or not? Alex? >> Yes, the first partition is /boot in fstab. > > I mean during kiwi build.
Phew - I don't remember to be honest :). > >> >>> >>>> When u-boot want to run load_fdt for non device tree board, it tries to >>>> run 1. Which is wrong but should not be fatal. >>> Fixed. >> This was on purpose. 1 is "true", so it's a command that simply gives us a >> good error code. > > Oups. Should be re-enabled if it is needed. I'm not 100% sure if it's needed, but it was there on purpose :) Alex -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
