Le 20/02/2014 11:54, 孙钰 a écrit : > I will test the new image on RevB3
Before getting a new image for 13.1, you can try the Factory image which should already have u-boot 2014.01. Guillaume > > 2014-02-18 23:05 GMT+08:00 Guillaume Gardet <[email protected]>: >> Le 18/02/2014 15:22, Nishanth Menon a écrit : >>> On 02/18/2014 03:15 AM, Alexander Graf wrote: >>>>> Am 18.02.2014 um 09:57 schrieb Guillaume Gardet >>>>> <[email protected]>: >>>>> >>>>> Hi, >>>>> >>>>> Le 16/02/2014 15:31, 孙钰 a écrit : >>>>>> Hi all, >>>>>> >>>>>> Neither the 12.3 and 13.1 image boot on Pandaboard-ES Rev B3 because >>>>>> the Modification of Elpida DDR2 RAM >>>>>> >>>>>> Here follows the serial port messages: >>>>>> U-Boot SPL 2013.04 (Jan 08 2014 - 14:33:37) OMAP4460 ES1.1 SDRAM: >>>>>> identified size not same as expected size identified: 0 expected: >>>>>> 40000000 >>>>> It seems to be a known problem. See: >>>>> http://eewiki.net/display/linuxonarm/PandaBoard#PandaBoard-FAQ >>>>> >>>>> Not sure how it will affect other board revision if we rebuild u-boot >>>>> without CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS. >>>>> >>>>> And why upstream u-boot keep things like that if it is known to be broken? >>>> Could we convert this into a runtime check against some easily accessible >>>> version register? >>> Commit 675cc77a3ae45e8b0ec17128563264d4a509f628 in upstream >>> also for the very latest, consider: >>> http://patchwork.ozlabs.org/patch/320811/ >>> >> So ,we could upgrade to latest u-boot (2014.01) from Base:System project to >> 13.1:Ports. >> >> Dirk or Alex, could you do that, please? >> >> Guillaume >> >> -- >> To unsubscribe, e-mail: [email protected] >> To contact the owner, e-mail: [email protected] >> > > -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
