> Am 09.03.2016 um 18:02 schrieb Freek de Kruijf <fr...@opensuse.org>: > > Op woensdag 9 maart 2016 14:40:58 schreef Alexander Graf: >> On 03/09/2016 02:28 PM, Freek de Kruijf wrote: >>> Op woensdag 9 maart 2016 13:34:40 schreef Alexander Graf: >>>> On 03/09/2016 01:18 PM, Freek de Kruijf wrote: >>>>> Op woensdag 9 maart 2016 11:33:54 schreef Freek de Kruijf: >>>>>> I tried >>>>>> openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2016.03.07-Build2.2.ra >>>>>> w. >>>>>> xz >>>>>> like you and it worked. >>>>>> My setup is RPi 2 with micro SD card of 8 GB, HDMI device connected, >>>>>> Ethernet cable connected. After applying power I see messages about >>>>>> booting >>>>>> from the SD card till booting the initrd. After that the screen is >>>>>> black >>>>>> for several minutes. Finally a greeting message appears showing the >>>>>> version >>>>>> of Tumbleweed and a login prompt. >>>>>> I continue by accessing the system via ssh. >>>>>> I don't know anything about a connected touchscreen. >>>>> >>>>> Indeed there is a problem. A new boot with the generated system does not >>>>> succeed. The system is trying to boot from the network. >>>> >>>> So it doesn't find the boot.scr file? Does it exist? >>> >>> Yes it exists in /boot/, which is the ext3 partition. I compared this >>> build >>> with the working Build389.1 and I do not see any obvious difference with >>> what is on the vfat partitions and on the ext3 partitions. >> >> If you have both a working and a non-working image around, could you >> please compare the output of "printenv" on the u-boot command line on >> both and send the diff? > > Hello Alex, > > I need more guidance here. I assume printenv needs to given on the RPi2 > system. How can I give that command on a system that does not boot.
U-boot comes up, right? In U-boot, press space to get a command prompt. On that prompt, type "printenv" :) Alex > > -- > fr.gr. > > member openSUSE > Freek de Kruijf > > -- > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org > -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org