On 11.03.16 13:07, Freek de Kruijf wrote: > Op vrijdag 11 maart 2016 12:33:14 schreef Alexander Graf: >> On 11.03.16 10:44, Freek de Kruijf wrote: >>> Op donderdag 10 maart 2016 13:28:08 schreef Guillaume Gardet: >>>> Hi, >>>> >>>> Le 10/03/2016 12:53, Freek de Kruijf a écrit : >>>>> Is there any support for the RPi camera in the openSUSE software for a >>>>> Raspberry Pi? I tried to find sources, but did not succeed. >>>> >>>> What do you need? >>>> >>>> raspberrypi-userland package provide some RPi tools such as: >>>> * raspistill >>>> * raspivid >>>> * raspividyuv >>>> * raspiyuv >>>> >>>> Otherwise, standard tool whould work too. >>>> >>>> >>>> Guillaume >>> >>> Thanks, one step further. I installed raspberrypi-userland and used the >>> command "raspistill -o <some_name>" and got the message: >>> >>> mmal: mmal_component_create_core: could not find component 'vc.ril.camera' >>> mmal: Failed to create camera component >>> mmal: main: Failed to create camera component >>> mmal: Camera is not enabled in this build. Try running "sudo raspi-config" >>> and ensure that "camera" has been enabled >>> >>> The bash script raspi-config I found seems to be written for Raspian. On >>> openSUSE it seems to do nothing. >>> >>> How to continue? >> >> Just a guess into the blue, but maybe the missing part is a device tree >> entry for the camera. Or just a random Config.txt option. > > I found to insert in /boot/efi/Config.txt: > > # Enable the camera module > start_x=1 > # Turn off the red camera LED when recording video or taking a still picture > disable_camera_led=1 > > Also appended the following line to /etc/modprobe.d/99-local.conf: > > install bcm2835-v4l2 /bin/true > > This provides the device /dev/video0 > > and enabled vcfiled via > > systemctl enable vcfiled.service > > which will start this service after a reboot or after a start command. > > But still raspistill gives: > > mmal: mmal_component_create_core: could not find component 'vc.ril.camera' > mmal: Failed to create camera component > mmal: main: Failed to create camera component > mmal: Failed to run camera app. Please check for firmware updates >
Do normal v4l accessing tools work? Like xawtv? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org