Booting a command list Loading linux.vmx... Loading initrd.vmx... EFI stub: Booting Linux Kernel... EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied EFI stub: ERROR: Could not determine UEFI Secure Boot status. EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map...
Hm... Seems to be no consoie from the kernel 2017-09-02 13:29 GMT+03:00 Matwey V. Kornilov <matwey.korni...@gmail.com>: > 2017-09-02 13:25 GMT+03:00 Andreas Färber <afaer...@suse.de>: >> Hi, >> >> Am 02.09.2017 um 12:06 schrieb Matwey V. Kornilov: >>> 1. Tools from https://github.com/rockchip-linux/rkbin are required to >>> prepare u-boot binary to be deployed into sd-card. The tools are >>> permitted to be redistributed, but they are x86_64-only binary blobs. >>> I think we could package them in RPM package and wrap them using >>> qemu-linux-x86_64 to execute them at JeOS building phase (at aarch64 >>> architecture). >> >> Negative. Same topic came up for Amlogic, and I had to develop the >> native Open Source meson-tools instead. >> >> For creating a JeOS image we need to use U-Boot SPL, which as I already >> pointed out should avoid all those binary-only x86 tools. >> >> If that is not working yet (you did not say), then we can just document >> the x86-only steps to keep them out of OBS. >> > > Well, I didn't find any U-Boot SPL implementation for RK3328 in any > u-boot trees. That is the issue currently. > >>> 2. bootloader are required to be placed at +16MB offset from the >>> beginning of SD card. We have to find a way to specify KIWI to place >>> EFI partition not at 2048sector as default. >> >> Yousaf gave a presentation on how to accomplish that for RK3399. >> >> If this reservation is implemented, then similar to my JeOS-nanopik2 >> image we could just leave out U-Boot and give users Wiki instructions on >> how to place U-Boot there themselves. >> >> You had forgotten to create an HCL Wiki page - I stubbed one out: >> >> https://en.opensuse.org/HCL:Rock64 >> >> Regards, >> Andreas >> >> -- >> SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany >> GF: Felix Imendörffer, Jane Smithard, Graham Norton >> HRB 21284 (AG Nürnberg) > > > > -- > With best regards, > Matwey V. Kornilov -- With best regards, Matwey V. Kornilov -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
