Hm, console=ttyS2,1500000 supposed to work, but it doesnt... 2017-09-04 11:00 GMT+03:00 Matwey V. Kornilov <matwey.korni...@gmail.com>: > Booting a command list > > Loading linux.vmx... > Loading initrd.vmx... > EFI stub: Booting Linux Kernel... > EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied > EFI stub: ERROR: Could not determine UEFI Secure Boot status. > EFI stub: Using DTB from configuration table > EFI stub: Exiting boot services and installing virtual address map... > > Hm... Seems to be no consoie from the kernel > > 2017-09-02 13:29 GMT+03:00 Matwey V. Kornilov <matwey.korni...@gmail.com>: >> 2017-09-02 13:25 GMT+03:00 Andreas Färber <afaer...@suse.de>: >>> Hi, >>> >>> Am 02.09.2017 um 12:06 schrieb Matwey V. Kornilov: >>>> 1. Tools from https://github.com/rockchip-linux/rkbin are required to >>>> prepare u-boot binary to be deployed into sd-card. The tools are >>>> permitted to be redistributed, but they are x86_64-only binary blobs. >>>> I think we could package them in RPM package and wrap them using >>>> qemu-linux-x86_64 to execute them at JeOS building phase (at aarch64 >>>> architecture). >>> >>> Negative. Same topic came up for Amlogic, and I had to develop the >>> native Open Source meson-tools instead. >>> >>> For creating a JeOS image we need to use U-Boot SPL, which as I already >>> pointed out should avoid all those binary-only x86 tools. >>> >>> If that is not working yet (you did not say), then we can just document >>> the x86-only steps to keep them out of OBS. >>> >> >> Well, I didn't find any U-Boot SPL implementation for RK3328 in any >> u-boot trees. That is the issue currently. >> >>>> 2. bootloader are required to be placed at +16MB offset from the >>>> beginning of SD card. We have to find a way to specify KIWI to place >>>> EFI partition not at 2048sector as default. >>> >>> Yousaf gave a presentation on how to accomplish that for RK3399. >>> >>> If this reservation is implemented, then similar to my JeOS-nanopik2 >>> image we could just leave out U-Boot and give users Wiki instructions on >>> how to place U-Boot there themselves. >>> >>> You had forgotten to create an HCL Wiki page - I stubbed one out: >>> >>> https://en.opensuse.org/HCL:Rock64 >>> >>> Regards, >>> Andreas >>> >>> -- >>> SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany >>> GF: Felix Imendörffer, Jane Smithard, Graham Norton >>> HRB 21284 (AG Nürnberg) >> >> >> >> -- >> With best regards, >> Matwey V. Kornilov > > > > -- > With best regards, > Matwey V. Kornilov
-- With best regards, Matwey V. Kornilov -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
