On Tue, 26 Dec 2017 18:14:08 +0100 Hartmut Krummrei <spiel...@posteo.de> wrote:
> Hi Manu, > > you don't read very well, don't you? ;-) Neither do you :P > > > What did I try: evrywhere is written, that you have to edit the > > raspberry-file in /etc/dracut.d/, but I have no such file. So what > > do I edit? It's /etc/dracut.conf.d/ If in doubt use the find utility or tab completion feature. It worked for me. Thanks Michal > > On Wed, 20 Dec 2017 16:37:31 +0000 > Manu Maier <mman...@outlook.de> wrote: > > > There are only two steps necessary to get the wlan up and running: > > > > 1. Delete "sdhci_iproc" from first line (add_drivers) in > > /etc/dracut.conf.d/raspberrypi_modules.conf > > > > Should then look like this: > > add_drivers+=" bcm2835-sdhost bcm2835_dma mmc_block " > > # Workaround for Wifi > > omit_drivers+=" sdhci-iproc" > > > > 2. Run "mkinitrd -f" > > > > Regards, > > Manu > > > > Am 20.12.2017 um 16:03 schrieb Hartmut Krummrei: > > > Hello, > > > > > > I managed to get Opensuse 42.3 running on my Raspi 3. That took > > > my just one day. After another day with the effortless tries to > > > get the built-in-wifi runnung I am at end. Was anyone able to get > > > the wifi-device working? > > > > > > What did I try: evrywhere is written, that you have to edit the > > > raspberry-file in /etc/dracut.d/, but I have no such file. So > > > what do I edit? > > > > > > I tried to manage the listed modules by hand, but if I remove > > > sdhc_ipc the system freezes. > > > Every package named "raspberry pi" is installed (for pi 3) and > > > bcmxxx too. > > > > > > Other seems to have difficulties too: > > > https://lists.opensuse.org/opensuse-arm/2017-08/msg00028.html > > > > > > Regards, > > > > > > Hartmut > > > > -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
