That was a type-error from me - I meant "etc/dracut.conf.d". That does
not change anything: there is no Raspberry-file which I can edit.
If you search for that problem with that file, you will find, that
everybody writes about Leap 42.2 not 42.3. So something has changed.
Hartmut
Am 28.12.2017 um 16:17 schrieb Michal Suchánek:
On Tue, 26 Dec 2017 18:14:08 +0100
Hartmut Krummrei<spiel...@posteo.de> wrote:
Hi Manu,
you don't read very well, don't you? ;-)
Neither do you :P
What did I try: evrywhere is written, that you have to edit the
raspberry-file in /etc/dracut.d/, but I have no such file. So what
do I edit?
It's /etc/dracut.conf.d/
If in doubt use the find utility or tab completion feature.
It worked for me.
Thanks
Michal
On Wed, 20 Dec 2017 16:37:31 +0000
Manu Maier<mman...@outlook.de> wrote:
There are only two steps necessary to get the wlan up and running:
1. Delete "sdhci_iproc" from first line (add_drivers) in
/etc/dracut.conf.d/raspberrypi_modules.conf
Should then look like this:
add_drivers+=" bcm2835-sdhost bcm2835_dma mmc_block "
# Workaround for Wifi
omit_drivers+=" sdhci-iproc"
2. Run "mkinitrd -f"
Regards,
Manu
Am 20.12.2017 um 16:03 schrieb Hartmut Krummrei:
Hello,
I managed to get Opensuse 42.3 running on my Raspi 3. That took
my just one day. After another day with the effortless tries to
get the built-in-wifi runnung I am at end. Was anyone able to get
the wifi-device working?
What did I try: evrywhere is written, that you have to edit the
raspberry-file in /etc/dracut.d/, but I have no such file. So
what do I edit?
I tried to manage the listed modules by hand, but if I remove
sdhc_ipc the system freezes.
Every package named "raspberry pi" is installed (for pi 3) and
bcmxxx too.
Other seems to have difficulties too:
https://lists.opensuse.org/opensuse-arm/2017-08/msg00028.html
Regards,
Hartmut
--
------------------------------------------------------------------------
"Ich habe keine besondere Begabung, sondern bin nur leidenschaftlich
neugierig." (Einstein)
spielmops.org <http://spielmops.org>
--
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
