> -----Original Message----- > From: Michael Ströder <mich...@stroeder.com> > Sent: 11 September 2019 20:44 > To: opensuse-arm@opensuse.org > Subject: Re: [opensuse-arm] RPI1 does not boot after Tumbleweed upgrade > > On 9/11/19 8:31 PM, Freek de Kruijf wrote: > > Op woensdag 11 september 2019 20:26:41 CEST schreef Freek de Kruijf: > >> I did have the same problem as Michael. After a "zypper dup --no-r" > >> the system did not boot anymore. I used the serial connection with > >> the RPi1 and there was no output at all. > >> > >> So I did check the content of the first partition on the SD. It did > >> lack the > >> 6 files present in: raspberrypi-firmware-2019.09.04-1.1.noarch.rpm > >> On my desktop I unpacked these files and put them on the first partition. > >> After that the system boots again. > >> > >> The question is: why were these files removed in the upgrade? > > > > I found also the answer: > > they are wrongly placed in /boot/vc/ instead of /boot/efi/ . > > I can confirm that manually copying the files fixed booting. Thanks. > > And as Freek I also suspect /boot/vc/ is wrong path because package > raspberrypi-firmware-2019.09.04-1.1.noarch is installed but 1. partition is > mounted on /boot/efi/.
The files should be copied to the right location, see: https://bugzilla.opensuse.org/show_bug.cgi?id=1150408#c1 Cheers, Guillaume > > Ciao, Michael. > -- > To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org > To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. N�����r��y隊Z)z{.�櫛맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.�櫛�0�����Ǩ�
