On Thu, Sep 22, 2005 at 01:26:41PM +0200, Martin Lasarsch wrote:
> try modprobe ivtv ivtv_debug=255 when its not loaded.
>
> I hope i can test it on the weekend on my system with 10.0 ...
OK, I did look at the messages (should have done that from the beginning)
and I got:
<snip all that worked>
Sep 22 13:19:49 linux kernel: ivtv: requesting ivtv-fw-enc.bin from hotplug
Sep 22 13:19:49 linux kernel: ivtv: firmware load failed
Sep 22 13:19:49 linux kernel: ivtv: failed loading encoder firmware
Sep 22 13:19:49 linux kernel: ivtv: Error loading firmware -3!
Sep 22 13:19:49 linux kernel: ivtv: Error -3 initializing firmware.
Sep 22 13:19:49 linux kernel: ivtv: Error -12 on initialization
Sep 22 13:19:49 linux kernel: ivtv-iTVC15_16_mpg2_encoder_card: probe of \
0000:00:0d.0 failed with error -12
I looked a bit around and found that ivtv-fw-enc.bin was in /lib/modules/.
I looked more around and found that somebody solved it by putting in in
/lib/firmware, so I moved it (not copied it) and now I got:
<snip all that worked>
Sep 22 14:12:53 linux kernel: ivtv: requesting ivtv-fw-enc.bin from hotplug
Sep 22 14:12:53 linux kernel: ivtv: firmware loaded
Sep 22 14:12:53 linux kernel: ivtv: requesting ivtv-fw-dec.bin from hotplug
Sep 22 14:12:53 linux kernel: ivtv: firmware load failed
Sep 22 14:12:53 linux kernel: ivtv: failed loading decoder firmware
Sep 22 14:12:53 linux kernel: ivtv: Error loading firmware -1!
Sep 22 14:12:53 linux kernel: ivtv: Error -1 initializing firmware.
Sep 22 14:12:53 linux kernel: ivtv: Error -12 on initialization
Sep 22 14:12:53 linux kernel: ivtv-iTVC15_16_mpg2_encoder_card: probe of \
0000:00:0d.0 failed with error -12
As you can see it still is looking somewhere on the wrong place.
No idea where it is actually looking, because I then would put
ivtv-fw-enc.bin in that place
I will also do the mknod -m 666 ... to make the /dev/video0 and see what
happens. So close and yet so far. :-)
houghi
--
Quote correct (NL) http://www.briachons.org/art/quote/
Zitiere richtig (DE) http://www.afaik.de/usenet/faq/zitieren
Quote correctly (EN) http://www.netmeister.org/news/learn2quote.html
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
