On Montag, 4. Juni 2007, Mike Coan wrote: > Frank, > > > I've installed additional 2GB of RAM into my Thinkpad Z61p. My > > kernel (latest SUSE-10.2-64bit) sees only 3GB of 4GB! > > > > Do i have to setup anything to see the whole memory? > > Check to see if there is a setting in the BIOS for > > Memory Hole remapping. > > I am far from an expert, but my understanding is that memory for the > PCI devices is reserved in the 3 GB to 4GB range. I had this problem > on our server. 4GB of memory installed bit only 3.5GB reported. > Enabling Memory hole remapping showed the entire 4 GB.
It looks like this: [EMAIL PROTECTED]:~> cat /proc/mtrr reg00: base=0x00000000 ( 0MB), size=2048MB: write-back, count=1 reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1 reg02: base=0xbff00000 (3071MB), size= 1MB: uncachable, count=1 reg03: base=0xd0000000 (3328MB), size= 256MB: write-combining, count=1 02: dunno 03: ATI FireGL 5200 256MB If i start memtest from an Ubuntu disk, it shows also only 3GB! :-((( -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]