-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
The Friday 2007-06-22 at 12:40 +0200, Lorenzo Cerini wrote:
> Hi all,
> i have a little trouble with a software raid1 array.
> i built it with opensuse10.0.
>
> Now one disks left the array giving me the (F) of failure for one partition.
> here is the cat /proc/mdstat:
...
> I ma quite far from this server location, so i need to know:
> how much fair is to assume disks is not broker and just use 'badblocks -f'?
>
> and if i want to replace it which is the easiest way ?
Be aware that software raid will remove a disk for a simple "glitch", a
temporary failure. Just scan the logs for errors, check the drive (smart
tests), etc. An attemt to write to a badblock would show on the log.
Then re-enable the disk, and watch it.
- --
Cheers,
Carlos E. R.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Made with pgp4pine 1.76
iD4DBQFGe7FXtTMYHG2NR9URAszYAJ97SZzC/kEMfr6i0Y2t12Vc5TPW4QCWNGju
0n96oriBlVKNDo+FyFzPkQ==
=9FsZ
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
