Ben Kevan wrote: > On Wednesday 24 October 2007 10:18:27 pm you wrote: >> Ben, >> >> I tried the xlib.lock work around and it didn't make any difference >> with the fglrx issue. Neither fgl_glxgears or fglrxinfo are operational. >> >> 00:08 Rankin-P35a~> export LIBXCB_ALLOW_SLOPPY_LOCK=true >> 00:09 Rankin-P35a~> fgl_glxgears >> Using GLX_SGIX_pbuffer >> X Error of failed request: GLXUnsupportedPrivateRequest >> Major opcode of failed request: 143 (GLX) >> Minor opcode of failed request: 16 (X_GLXVendorPrivate) >> Serial number of failed request: 41 >> Current serial number in output stream: 42 >> On Wednesday 24 October 2007 09:34:29 pm you wrote: >> >> Also, 3D is gone for some unknown reason: >> >> [root Rankin-P35a/home/david] # sax2 >> SaX: Checking update status for fglrx driver >> SaX: initialization already done >> SaX: call [ sax2 -r ] if your system has changed ! >> >> SaX: startup >> SaX: X-Server: :0.0 -> grant >> SaX: importing current configuration... >> >> Sax then opens a dialog saying it cannot configure 3D because the card >> or driver doesn't support 3D. Bullshit! 3D worked just fine 1 hour ago >> with the 8.41 driver. >> >> This is really strange. I'm going to try and rebuild the kernel modules >> and see if that help. Thanks for your great help. It is always much >> nicer to have a helping hand remind you that there is no reason to start >> throwing laptops.. Cooler heads will prevail! > > Hey, > > How did things go? Sorry, started updating my MythBox last night.. and that > took alot longer then expected (Ubuntu 7.04 to 7.10) and it broke my VNC and > I don't have my router forwarding SSH :( .. So can't work on from here go get > VNC working.. Oh well TV works fine :D > > Ben >
Here is where we are. After installing 8.42.3, I found that rpm -e of either the 8.40 or 8.41 driver failed to remove and replace the /usr/lib/libGL.so.1.2* library with the new /usr/X11R6/lib/libGL.so.1.2* from 8.42. This was causing a conflict that borked fglrx. After fixing this by moving /usr/lib/libGL.so.1.2 to /usr/lib/libGL.so.1.2.old and then # ln -s /usr/X11R6/lib/libGL.so.1.2 /usr/lib/libGL.so.1.2 "J" (CyberOrg) was most helpful in pointing out that there may be other libGL conflicts. However, after make the above change, fgl_glxgears and fglrxinfo work as they are supposed to. Also, after looking for additional conflicts, I think I'm OK. (do you see anything else amiss) http://www.3111skyline.com/download/screenshot/libGL_pkgs01.png http://www.3111skyline.com/download/screenshot/libGL_pkgs02.png However, the AIT control center (/usr/bin/amdcccle) still will NOT run. I haven't a clue what is causing this problem. As we spoke, the java error is still present: [root rankin-p35a/home/david] # /usr/bin/amdcccle amdcccle: xcb_xlib.c:52: xcb_xlib_unlock: Assertion `c->xlib.lock' failed. Aborted "export LIBXCB_ALLOW_SLOPPY_LOCK=true", eliminates the error, but the control center will not start and requires a ctrl+c to kill the process. Also, "aticonfig" will NOT run. I have posted my xorg.conf. If anyone can take a look and see if there is anything wrong, I would appreciate it. It is at: http://www.3111skyline.com/download/screenshot/xorg.conf J also has a very helpful blog for the new drivers: http://dev.compiz-fusion.org/~cyberorg/2007/10/24/ati-8433-on-opensuse-the-hard-way/ The blog pointed out that I needed to edit xorg.conf and add: Option “AIGLX” “true” to "ServerFlags" and change the extensions: Section “Extensions Option “DAMAGE” “true” Option “Composite” “true” EndSection This is where I am. I have not loaded xorg 7.3 yet and I am still trying to get compiz working. "kwin" works like a dream, good 3D, frame rates, etc. My goal is NOT to have to reload 10.3! That shouldn't be necessary, and I don't want to kill 5 hours installing, patching and re-tweaking, even with the benefit of Yast autoinstall and simply saving and remounting /home. So I am back to my plea for HELP! Y'all have been great to help me get this far, and I'm confident I can make this work. Is the anything else I can send or post that might help get to the bottom of what is going on?? -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]