[EMAIL PROTECTED] wrote: > On 2007. 12. 16., Sunday 11:44, Luc Willems wrote: >> On Sunday 16 December 2007 01:36:33 Wolfgang Woehl wrote: >>> Samstag, 15. Dezember 2007 Luc Willems: >>>> hello all , >>>> >>>> if installed an "old" SB Live 5.1 card in my 10.3 suse system to led me >>>> use the waveable features. >>>> >>>> while testing the "normal" sound feature playing a mp3 , in noticed >>>> that the normal volume control in my kmix didn't work correctly. >>>> basicly , volume was controled with the "Wave Surround" mixer control >>>> instead of Master or PCM control. I validated this with the alsamixer >>>> which had the same behaviour. >>>> >>>> both Master and PCM are not working. the boxes are connected at the >>>> back of the card to the rear speaker connection. i just use a plain >>>> sterio setup with 2 speakers. >>>> >>>> i looked around at the alsa site an mailing list , but couldn't find >>>> any sollution or even a description of the problem. >>>> >>>> luc >>> Why don't you plug your speakers into the ffsp?? >> because , a year ago , i also used this card, then running suse 10.1 or >> 10.0 and it wasn't a issue than. I always used the "black" colered plug to >> connect my speakers as long as i used this card (since suse 9.3 and have >> run all series). always used 2 speaker setup. >> >> it' could be a hardware problem but i'm not confinced in that. because al >> functions work exept mixer controls are somehow "mixed up". >> i read on the alsa site that it is possible to "arange" the mixer control >> by reprogamming the DSP chip so somehow i feel this seems to be >> a glitch . > > I have an ASUS M2N-E motherboard with an integrated MCP55 module, using the > hda_intel driver. I have very similar symptoms, e.g. the front mic works only > when I set the mixer to record from the line input. My problem only exists > under 10.3. In the end I gave up and reverted to opensuse 10.2 where the > mixer works flawlessly. > Tom
Make sure you file bug reports with Novell on each such issue. There is no excuse for something to be working in 10.2 and broken in 10.3. That is inexcusable - especially now 60 days after the release. -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
