Matt T. wrote: > This is a while ago and it just worked, thus I did not take any notes... but > ok, I try: > > Assuming you run 10.3 with a recent kernel. I don't remember if it was > already > working with the kernel and rt2x00-kmp out of the box, mainly because when I > installed it I had already updated the kernel several times. > > - Install the rt2x00 module for your kernel; probably a reboot is helpful > after that > > - do not load ndiswrapper, unload it if needed, and make sure it does not get > loaded when rebooting. This might not matter as long as you have no win > drivers for the DWL-G122 installed, but better be sure, and you won't need > them anyway. > > - plug in the DWL-G122 - knetworkmanager will open a window and ask for > connection details > > Note: IIRC I did not setup the card directly with Yast. It is managed through > knetworkmanager / networkmanager
Sounds right, except for the reboot - doh! no windoze involved, so we just need a modprobe, not a reboot. Joe -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]