I don't know the tftpd32. But perhaps for you it's better to try another dhcp
server to check where the problem is, dhcp or OTC. or use the vm appliance to
get everything working without to much work.
Greets
Julian
Von meinem iPad gesendet
Am 20.05.2013 um 11:57 schrieb "Mohan Kumar" <mohank....@gmail.com>:
> Dear friends
>
> i tried the above solutions,
>
> but no luck!
>
> i need to know how can i make sure that
>
> OTC TFTP IS WORKING ?
>
> because i need to specify in DHCP.
>
> TFTP DIR, BOOT FILE ETC..
>
> WHEN I TURN ON THE CLIENT CLIENT COMMUNICATES WITH DHCP, BUT DHCP IS NOT
> COMUNNICATED WITH TFTP TO PASS THE BOOT FILE.
>
> I GET TFTP.....
>
> ERROR
>
> Thanks.
> ----- Original Message -----
> From: Stecher, Alexander
> To: openthinclient-user@lists.sourceforge.net
> Sent: Saturday, May 18, 2013 5:28 AM
> Subject: Re: [openthinclient-user] dhcp
>
> Usually you don't have to set the option 66 and 67 on the DHCP Server. The
> DHCPproxy functionality from the openthinclient server can handle this - like
> describted above.
> However, please try to change/set in the -> environment -> start option ->
> PXE service
>
> It is usually set to auto, but you can change it manually.
> Restart the openthinclient-service and try it.....
>
> --
> Alexander Stecher
> Dipl.-Ing. (BA)
> Telefon: +49 711 1378636-0
> Handy: +49 151 2761 2961
> mailto:a.stec...@openthinclient.com
>
> openthinclient gmbh, Heilbronner Straße 150, 70191 Stuttgart, Deutschland
> Amtsgericht Stuttgart: HRB 245 177; USt-ID: DE216017092
> Geschäftsführer: Alexander Stecher
> http://openthinclient.com
>
> Am 18.05.2013 14:17 schrieb "Mark D-B" <newsgroup....@virginmedia.com>:
>> Dear Mohan et al,
>>
>> This seems to be something which depends a lot on the DHCP server in use.
>> I run OTC in a VM with the network adaptor in bridged mode. With a TP-Link
>> router doing DHCP, PXE works with no issues. The same is true if I am using
>> named and dhcpd. However, if I use dnsmasq instead then I need to specify
>> both the the OTC server IP address and the boot file name in the
>> configuration file, or PXE fails. Whether OTC would see the new client in
>> these circumstances, I don't know, as the clients had already been added
>> before I changed the network topology.
>> Mohan - are you in a position where you can use Wireshark on the network?
>> This will allow you to determine which step is failing.
>>
>> Also, just to be clear, this is a machine which is new to the server which
>> is being PXE'd, yes? When you say that the PXE machine is not recognised,
>> you mean that the machine's IP address is not appearing in the PXE section
>> of the OTC manager display? OTC won't let you actually PXE boot a client
>> until you have authorised it.
>>
>> All the best,
>>
>> Mark
>>
>> On 18/05/13 10:55, Mohan Kumar wrote:
>>> Hi
>>>
>>> Exactly
>>>
>>> my dhcp server is tfpd32 ver 4..0 with - ip 192.168.xx.200
>>> ip pool---------------10
>>>
>>> dns ----------192.168.xx.1
>>>
>>> here there is field for boot file --- ?
>>>
>>>
>>> my otc machine ip 192.168.xx.201
>>>
>>> i just installed and joined default realm.
>>>
>>> i am trying to boot the third machine via pxe it is not showing any thing.
>>>
>>> any help is appreciated.
>>>
>>> i wonder how it works curiosity 1000 %.
>>>
>>> Thank you
>>>
>>>
>>> ----- Original Message -----
>>> From: Julian Ohm
>>> To: openthinclient-user@lists.sourceforge.net
>>> Sent: Friday, May 17, 2013 11:48 PM
>>> Subject: Re: [openthinclient-user] dhcp
>>>
>>> Hi
>>>
>>> As i remember you should not set anything. Just configure your dhcp server
>>> to provide ip settings. OTC will handle pxe request by his self.
>>>
>>> Try to deactivate every kind of firewall. And OTC and dhcp must not be on
>>> the same Server.
>>>
>>> Greets
>>> Julian
>>>
>>> Von meinem iPad gesendet
>>>
>>> Am 18.05.2013 um 06:43 schrieb "Luis R. Barahona"
>>> <luis.r.barah...@gmail.com>:
>>>
>>>> I think you are confused about which option you need to set in dhcp.
>>>>
>>>>
>>>>
>>>> Option 66 will contain the ip or FQDN of your OTC Server
>>>>
>>>>
>>>>
>>>> Option 67 will contain the name of your bootfile
>>>>
>>>>
>>>>
>>>> For OTC you only need to set option 66. Have you done this?
>>>>
>>>> ------------------------------------------------------------------------------
>>>> AlienVault Unified Security Management (USM) platform delivers complete
>>>> security visibility with the essential security capabilities. Easily and
>>>> efficiently configure, manage, and operate all of your security controls
>>>> from a single console and one unified framework. Download a free trial.
>>>> http://p.sf.net/sfu/alienvault_d2d
>>>> _______________________________________________
>>>> The Open Source Thin Client Solution http://openthinclient.org
>>>> openthinclient-user@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>>> ------------------------------------------------------------------------------
>>> AlienVault Unified Security Management (USM) platform delivers complete
>>> security visibility with the essential security capabilities. Easily and
>>> efficiently configure, manage, and operate all of your security controls
>>> from a single console and one unified framework. Download a free trial.
>>> http://p.sf.net/sfu/alienvault_d2d
>>> _______________________________________________
>>> The Open Source Thin Client Solution http://openthinclient.org
>>> openthinclient-user@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> AlienVault Unified Security Management (USM) platform delivers complete
>>> security visibility with the essential security capabilities. Easily and
>>> efficiently configure, manage, and operate all of your security controls
>>> from a single console and one unified framework. Download a free trial.
>>> http://p.sf.net/sfu/alienvault_d2d
>>>
>>>
>>> _______________________________________________
>>> The Open Source Thin Client Solution http://openthinclient.org
>>> openthinclient-user@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>>
>>
>> ------------------------------------------------------------------------------
>> AlienVault Unified Security Management (USM) platform delivers complete
>> security visibility with the essential security capabilities. Easily and
>> efficiently configure, manage, and operate all of your security controls
>> from a single console and one unified framework. Download a free trial.
>> http://p.sf.net/sfu/alienvault_d2d
>> _______________________________________________
>> The Open Source Thin Client Solution http://openthinclient.org
>> openthinclient-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>
> ------------------------------------------------------------------------------
> AlienVault Unified Security Management (USM) platform delivers complete
> security visibility with the essential security capabilities. Easily and
> efficiently configure, manage, and operate all of your security controls
> from a single console and one unified framework. Download a free trial.
> http://p.sf.net/sfu/alienvault_d2d
> _______________________________________________
> The Open Source Thin Client Solution http://openthinclient.org
> openthinclient-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
> ------------------------------------------------------------------------------
> AlienVault Unified Security Management (USM) platform delivers complete
> security visibility with the essential security capabilities. Easily and
> efficiently configure, manage, and operate all of your security controls
> from a single console and one unified framework. Download a free trial.
> http://p.sf.net/sfu/alienvault_d2d
> _______________________________________________
> The Open Source Thin Client Solution http://openthinclient.org
> openthinclient-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user
