Did you check, if all required ports are available?
Use e.g. the openthinclient advisor.
--
Alexander Stecher
Dipl.-Ing. (BA)
Telefon: +49 711 1378636-0
Handy: +49 151 2761 2961
mailto:a.stec...@openthinclient.com
openthinclient gmbh, Heilbronner Straße 150, 70191 Stuttgart, Deutschland
Amtsgericht Stuttgart: HRB 245 177; USt-ID: DE216017092
Geschäftsführer: Alexander Stecher
http://openthinclient.com
Am 20.05.2013 12:07 schrieb "Mohan Kumar" <mohank....@gmail.com>:
> **
> Dear friends
>
> i tried the above solutions,
>
> but no luck!
>
> i need to know how can i make sure that
>
> OTC TFTP IS WORKING ?
>
> because i need to specify in DHCP.
>
> TFTP DIR, BOOT FILE ETC..
>
> WHEN I TURN ON THE CLIENT CLIENT COMMUNICATES WITH DHCP, BUT DHCP IS NOT
> COMUNNICATED WITH TFTP TO PASS THE BOOT FILE.
>
> I GET TFTP.....
>
> ERROR
>
> Thanks.
>
> ----- Original Message -----
> *From:* Stecher, Alexander <a.stec...@openthinclient.com>
> *To:* openthinclient-user@lists.sourceforge.net
> *Sent:* Saturday, May 18, 2013 5:28 AM
> *Subject:* Re: [openthinclient-user] dhcp
>
> Usually you don't have to set the option 66 and 67 on the DHCP Server. The
> DHCPproxy functionality from the openthinclient server can handle this -
> like describted above.
> However, please try to change/set in the -> environment -> start option ->
> PXE service
>
> It is usually set to auto, but you can change it manually.
> Restart the openthinclient-service and try it.....
>
> --
> Alexander Stecher
> Dipl.-Ing. (BA)
> Telefon: +49 711 1378636-0
> Handy: +49 151 2761 2961
> mailto:a.stec...@openthinclient.com
>
> openthinclient gmbh, Heilbronner Straße 150, 70191 Stuttgart, Deutschland
> Amtsgericht Stuttgart: HRB 245 177; USt-ID: DE216017092
> Geschäftsführer: Alexander Stecher
> http://openthinclient.com
> Am 18.05.2013 14:17 schrieb "Mark D-B" <newsgroup....@virginmedia.com>:
>
>> Dear Mohan et al,
>>
>> This seems to be something which depends a lot on the DHCP server in
>> use. I run OTC in a VM with the network adaptor in bridged mode. With a
>> TP-Link router doing DHCP, PXE works with no issues. The same is true if I
>> am using named and dhcpd. However, if I use dnsmasq instead then I need to
>> specify both the the OTC server IP address and the boot file name in the
>> configuration file, or PXE fails. Whether OTC would see the new client in
>> these circumstances, I don't know, as the clients had already been added
>> before I changed the network topology.
>> Mohan - are you in a position where you can use Wireshark on the
>> network? This will allow you to determine which step is failing.
>>
>> Also, just to be clear, this is a machine which is new to the server
>> which is being PXE'd, yes? When you say that the PXE machine is not
>> recognised, you mean that the machine's IP address is not appearing in the
>> PXE section of the OTC manager display? OTC won't let you actually PXE boot
>> a client until you have authorised it.
>>
>> All the best,
>>
>> Mark
>>
>> On 18/05/13 10:55, Mohan Kumar wrote:
>>
>> Hi
>>
>> Exactly
>>
>> my dhcp server is tfpd32 ver 4..0 with - ip 192.168.xx.200
>> ip pool---------------10
>>
>> dns ----------192.168.xx.1
>>
>> here there is field for boot file --- ?
>>
>>
>> my otc machine ip 192.168.xx.201
>>
>> i just installed and joined default realm.
>>
>> i am trying to boot the third machine via pxe it is not showing any thing.
>>
>> any help is appreciated.
>>
>> i wonder how it works curiosity 1000 %.
>>
>> Thank you
>>
>>
>>
>> ----- Original Message -----
>> *From:* Julian Ohm <j...@ohm-meyer.de>
>> *To:* openthinclient-user@lists.sourceforge.net
>> *Sent:* Friday, May 17, 2013 11:48 PM
>> *Subject:* Re: [openthinclient-user] dhcp
>>
>> Hi
>>
>> As i remember you should not set anything. Just configure your dhcp
>> server to provide ip settings. OTC will handle pxe request by his self.
>>
>> Try to deactivate every kind of firewall. And OTC and dhcp must not be on
>> the same Server.
>>
>> Greets
>> Julian
>>
>> Von meinem iPad gesendet
>>
>> Am 18.05.2013 um 06:43 schrieb "Luis R. Barahona" <
>> luis.r.barah...@gmail.com>:
>>
>> I think you are confused about which option you need to set in dhcp.
>>
>>
>> Option 66 will contain the ip or FQDN of your OTC Server
>>
>>
>> Option 67 will contain the name of your bootfile
>>
>>
>> For OTC you only need to set option 66. Have you done this?
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> AlienVault Unified Security Management (USM) platform delivers complete
>> security visibility with the essential security capabilities. Easily and
>> efficiently configure, manage, and operate all of your security controls
>> from a single console and one unified framework. Download a free trial.
>> http://p.sf.net/sfu/alienvault_d2d
>>
>> _______________________________________________
>> The Open Source Thin Client Solution http://openthinclient.org
>> openthinclient-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>>
>> ------------------------------
>>
>> ------------------------------------------------------------------------------
>> AlienVault Unified Security Management (USM) platform delivers complete
>> security visibility with the essential security capabilities. Easily and
>> efficiently configure, manage, and operate all of your security controls
>> from a single console and one unified framework. Download a free trial.
>> http://p.sf.net/sfu/alienvault_d2d
>>
>> ------------------------------
>> _______________________________________________
>> The Open Source Thin Client Solution http://openthinclient.org
>> openthinclient-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>>
>>
>>
>> ------------------------------------------------------------------------------
>> AlienVault Unified Security Management (USM) platform delivers complete
>> security visibility with the essential security capabilities. Easily and
>> efficiently configure, manage, and operate all of your security controls
>> from a single console and one unified framework. Download a free
>> trial.http://p.sf.net/sfu/alienvault_d2d
>>
>>
>>
>> _______________________________________________
>> The Open Source Thin Client Solution
>> http://openthinclient.orgopenthinclient-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/openthinclient-user
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> AlienVault Unified Security Management (USM) platform delivers complete
>> security visibility with the essential security capabilities. Easily and
>> efficiently configure, manage, and operate all of your security controls
>> from a single console and one unified framework. Download a free trial.
>> http://p.sf.net/sfu/alienvault_d2d
>> _______________________________________________
>> The Open Source Thin Client Solution http://openthinclient.org
>> openthinclient-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>>
>> ------------------------------
>
>
> ------------------------------------------------------------------------------
> AlienVault Unified Security Management (USM) platform delivers complete
> security visibility with the essential security capabilities. Easily and
> efficiently configure, manage, and operate all of your security controls
> from a single console and one unified framework. Download a free trial.
> http://p.sf.net/sfu/alienvault_d2d
>
> ------------------------------
>
> _______________________________________________
> The Open Source Thin Client Solution http://openthinclient.org
> openthinclient-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>
>
>
> ------------------------------------------------------------------------------
> AlienVault Unified Security Management (USM) platform delivers complete
> security visibility with the essential security capabilities. Easily and
> efficiently configure, manage, and operate all of your security controls
> from a single console and one unified framework. Download a free trial.
> http://p.sf.net/sfu/alienvault_d2d
> _______________________________________________
> The Open Source Thin Client Solution http://openthinclient.org
> openthinclient-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>
>
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user
