Do you really have permission to scan? Eero 16.2.2016 1.05 ip. "Michele Lasaponara" <[email protected]> kirjoitti:
> Thanks for timely response, I had already thought that increasing the > scan intensity I could lose some results, but in my case the reverse is > true: with another scan intensity (host) I get more results than when > using a low intensity scan (20 hosts). > As the networks on which I perform the tests are university departments's > whole LAN, I haven't information about present devise in the network. > Regards > > 2016-02-16 10:18 GMT+01:00 Eero Volotinen <[email protected]>: > >> Well. It depends on your network.is there some idp/ids system on >> network? Or something active component that detects/blocks scanning? Also >> too intensive scanning can cause poor results due to load on scanning >> machine or network components? >> >> Eero >> >> Eero >> 16.2.2016 10.57 ap. "Michele Lasaponara" <[email protected]> >> kirjoitti: >> >>> Hello OpemVAS's users, >>> I have noticed that doing tests on some networks or subnets, when I make the >>> test with different parameters (scan intensity and port list) I have >>> some strange results, for example using port list All TCP I have less >>> results of the port list Openvas Default or decreasing the scan intensity I >>> get less results. Is it normal? >>> >>> _______________________________________________ >>> Openvas-discuss mailing list >>> [email protected] >>> >>> https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss >>> >> >
_______________________________________________ Openvas-discuss mailing list [email protected] https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
