Hi Gabor, thanks a lot for the detailed answers!
On 04/07/2010 02:12 PM, Gabor Juhos wrote: > The bootloader lowers the speed of the AHB bus before it initializes the > switch, > and restore it after the initialization is done. > ... > Yes. The datasheet says that at least. The problem is that you can't set it, > because writing of the AG71XX_REG_MII_CFG register has no effect on the > AR913x. > ... >>> To be precise, there is yet another solution: configuring the AR8216 switch >>> with >>> special ethernet packets. >> Is there any example source code for this (I guess headers != 0x10 80 are >> needed)? > > You can find that in the u-boot's source code of the WNR2000 v1 for example. > (u-boot-1.1.4/board/ar7100/common/athrs26_phy.c) I think I'll look into the u-boot sources. If I find the MDIO clock on the pcb of my WNR2000v1, I may try some values in MII_CFG, too. Regards, Jörg. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
