On Wed, 2010-11-17 at 09:21 +0100, Bas Mevissen wrote: > (keeping the list in the loop) Oops... that was my intention as well. > > On Tue, 2010-11-16 at 10:56 +0100, Bas Mevissen wrote: > > > On Mon, 15 Nov 2010 22:45:48 +0100, Maarten Bezemer > > > <m.m.beze...@utwente.nl> wrote: > > > > On Mon, 2010-11-15 at 12:08 +0100, Bas Mevissen wrote: > > > > > I just did a build on backfire (revision 14012) for Orion (while > > > checking a patch for make 3.82 for busybox). No problem at all. > > > > > So I cannot reproduce the problem here. Can you check again and give > > > > > me > > > the output of "svn info | grep Revision" of the failing tree (assuming > > > it is a checkout from svn)? > > > I have just updated to Revision 24016. After rebuilding everything I > > still have the error on the iptables package. I have put the last few > > commands before the error and the error itself in the attached log file. > > Looking at the output, I see -L/usr/lib where it should refer to the > libraries of the cross compiled uClibc.
I noticed, that why I send my patch which fixed this path. After that the packages were installed in the wrong directory or could not be found to install (I cannot remember exactly), so I added a solution for that to the patch as well. > This problem happens on my side too (but compilation goes fine). There > is definitely something wrong with the package and that needs a fix. > The LDFLAGS passed to the configure script look OK, so the bug is in > the package itself. > > But the first question to answer is why you have a problem with it > (and other people too according to the forum), while a lot of people > have no problem at all. Just a stupid idea: do you have the openwrt SDK > installed somewhere? What does "which > arm-openwrt-linux-uclibcgnueabi-gcc" say? Can you post the .config file > you use? I can answer this question more thorough this evening when I am at home. But I do not have an openwrt SDK installed, so I suppose "which arm-openwrt-linux-uclibcgnueabi-gcc" does not return any hits. Compiling iptables goes wrong after a "make distclean" and only modification is the target set to Marvel Orion. This evening I will send my .config file as well. > I'll take a close look at the iptables package, but don't hold your > breath... Ok, that would be nice, since my patch obviously was incorrect and a workaround for the bug in the package. Also, as I mentioned before the iptables package in the trunk is working. If copying it is not possible, it might be an idea to compare both versions? Thanks, Maarten _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
