The attached patches add support for the Linksys E3000v1 and WRT610nV2. They should be applied after the patches George provided below. I believe the "003-openwrt4716-TARGET_brcm4716-prereq.patch" can be applied directly to trunk as well (dependent on George's broadcom-diag patch being applied first).
As stated below, make sure you read the "openwrt-bcm4716-README.txt" as I do not have a WRT610nV2 to test with. Serial access is highly recommended. I added a separate profile for each device, but they probably can be combined into a single profile since they are the same H/W. George... can you include these to your patch set? Nathan > From: [email protected] > To: [email protected] > Date: Sat, 12 Feb 2011 01:15:40 +0200 > Subject: Re: [OpenWrt-Devel] [PATCH 002/002] ASUS RT-N16 kmod-diag and > base-files detection/setup support > > Hi > > Sorry, got to my workpad too late to finally sort things out - was > extremely busy with my work last few days. > Much happy to see people are interested in getting 4716-based things > working with Openwrt. > > > > > I have been following the changes you have posted, and attempting to > > get them to work on a Linksys E3000 as well (same hardware > > as the WRT610nV2). I had a working image using the 2.6.22 patches you > > had posted a while back; and the 2.6.37 version boots up with > > working USB, but no success with ethernet. > Haven't been posting ethernet driver therefore there were no ethernet > support ;) > Had to sort few bugs out. > > > Interestingly, one of the > > wireless devices can be made to work on the E3000 > > using the existing broadcom-wl driver in trunk with a small patch to > > recognize the device. > Sounds extremely interesting. Haven't been trying to get wifi working > with broadcom-wl. > > > submitted once there is something to submit them against; some of them > > could be applied directly to trunk as well. > Well, if no chance to get separate bcm4716 target with Openwrt then I > might setup own public svn for just it alone but that will be next > weekends, too much busy with work till then. > > > anxious to see your latest set of kernel patches if you have the > > ethernet working, as it shouldn't take much to get the ethernet working > > on the E3000/WRT610nV2. If the patches aren't submitted to trunk soon; > > is there a chance you could post your latest patches here again? > Haven't been posting full set yet till now. Was not ready with fully > testing things out. > Here are 3 .tar.bz2'ed patches to get ASUS RT-N16 (and possibly others > 4716-based routers) boot with Openwrt trunk, 2.6.37 kernel: > http://www.znau.edu.ua/temp/asus-rt-n16/2011-02-12T00-10/2011-02-12T00-10_openwrt4716.tar.bz2 > > Individual patches and md5 signs you can get here: > http://www.znau.edu.ua/temp/asus-rt-n16/2011-02-12T00-10/ > > Here is bootable image built with Openwrt trunk #25469: > http://www.znau.edu.ua/temp/asus-rt-n16/2011-02-12T00-10/openwrt-brcm4716-squashfs.trx > > As I've reported before still no wifi. You will get just usb and > ethernet working. > > And PLEASE, whoever want to test this out, FIRST READ > openwrt-bcm4716-README.txt which is supplied with .tar.bz2 or get it > from http://www.znau.edu.ua/temp/asus-rt-n16/openwrt-bcm4716- > README.txt. > Do that prior flashing your box and even prior planning on such. > Stuff posted is working clean on several N16's I've got, most likely > will work the same on others non ASUS but bcm4716-based embeddables, > might work on 47162 ones too (never heard about such tho). > But until it is tested on non-ASUS hardware please DONT EVER try it out > if you dont know how to debrick your box for sure. > > Would be much appreciated if you let me know whether you got your > 4716'box working with this or not. > > Have nice day, > George > > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
003-openwrt4716-TARGET_brcm4716-prereq.patch
Description: Binary data
004-openwrt4716-TARGET_brcm4716.patch
Description: Binary data
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
