On Wed, Mar 30, 2011 at 10:52 PM, Yeoh Chun Yeow <yeohchuny...@gmail.com>wrote:
> Dear all, > > I am able to get the patch works by adding the following in mach-ubnt.c: > > ar71xx_eth1_data.phy_mask = UBNT_RS_LAN_PHYMASK > > However, there is two issues here: > 1. RouterStation has two ports on ETH1. One port can only be activated > after the other port is connected with cable. If this port is unplug, the > port will not be activated even with cable connect. > 2. VLAN separation is alright but VLAN tagging is not working. I am using > the following: > > config 'switch' > option 'name' 'eth1' > option 'reset' '1' > option 'enable_vlan' '1' > option 'enable' '1' > > config 'switch_vlan' > option 'device' 'eth1' > option 'vlan' '1' > option 'vid' '1' > option 'ports' '0t 1t 5t' > > Tag and No Tag on the port, I am still able to PING a host without VLAN > tagging. It means that the VLAN tagging is not working. > > Please advice. Thanks > > Regards, > Chun Yeow > >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
