you need to build own image where enable eth1 port. eth1 connected to internal switch. Read topics https://forum.openwrt.org/viewtopic.php?id=48907 and https://forum.openwrt.org/viewtopic.php?id=48892
2014-02-18 15:04 GMT+02:00 bjzhougong <bjzhoug...@126.com>: > Thanks for All > > but in WR703N's network config, it doesn't has switch: > config interface 'loopback' > option ifname 'lo' > option proto 'static' > option ipaddr '127.0.0.1' > option netmask '255.0.0.0' > > config interface 'lan' > # option ifname 'eth0' > option type 'bridge' > option proto 'static' > option ipaddr '192.168.22.1' > option netmask '255.255.255.0' > > config interface 'wan' > option ifname 'eth0' > option proto 'dhcp' > > ------------------------------ > bjzhougong > > *From:* camden lindsay <camden.lindsay+open...@gmail.com> > *Date:* 2014-02-18 06:23 > *To:* OpenWrt Development List <openwrt-devel@lists.openwrt.org> > *CC:* bjzhougong <bjzhoug...@126.com> > *Subject:* Re: [OpenWrt-Devel] How to use ethernet port as lan or wan > port in WR703N > It sounds like you have to re-configure the switch, to have the port > that is currently 'wan' on the same vlan as the LAN. > > see http://wiki.openwrt.org/doc/uci/network/switch > > On Mon, Feb 17, 2014 at 2:04 PM, jonsm...@gmail.com <jonsm...@gmail.com > > wrote: > > On Mon, Feb 17, 2014 at 4:48 PM, Hartmut Knaack <knaac...@gmx.de> wrote: > >> jonsm...@gmail.com schrieb: > >>> The switch (esw) configuration separates the LAN and WAN ports. > > >> But according to the wiki, the 703n has only one ethernet port and no > >> switch. > > > > AR9331 has the switch on chip. > > http://www.eeboard.com/wp-content/uploads/downloads/2013/08/AR9331.pdf > > > > > >>> > >>> On Mon, Feb 17, 2014 at 4:07 PM, Hartmut Knaack <knaac...@gmx.de > > wrote: > >>>> bjzhougong schrieb: > >>>>> Dear Sirs. > >>>>> > > >>>>>>> As we know, we can configure "network.lan.interface" or > >>>>>>> "network.wan.interface" as eth0 to use ethernet port as lan or wan > >>>>>>> port on WR703N. > > >>>>>>> I think it should need to do anything in driver for switch ethernet > >>>>>>> port, > > >>>>>>> and I want to know what happened between user space and kernel space > >>>>>>> after we run "/etc/init.d/network restart", > >>>>>>> Thanks for any idea about this! > >>>>> If there is any help? Thanks! > > >>>> Not sure, what exactly you want to know. When running > >>>> "/etc/init.d/network restart", all the configured options in > >>>> /etc/config/network get configured. See > http://wiki.openwrt.org/doc/uci/network > for more information about available options. > > >>>> When changing a certain network device from WAN to LAN, it is mainly > >>>> about switching the configuration from being DHCP master or slave, and > >>>> some routing configurations. > > >>>>> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ > >>>>> bjzhougong > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> openwrt-devel mailing list > >>>>> openwrt-devel@lists.openwrt.org > >>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >>>> _______________________________________________ > >>>> openwrt-devel mailing list > >>>> openwrt-devel@lists.openwrt.org > >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >>> > >>> > >> _______________________________________________ > >> openwrt-devel mailing list > >> openwrt-devel@lists.openwrt.org > >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > > > > > > > -- > > Jon Smirl > > jonsm...@gmail.com > > _______________________________________________ > > openwrt-devel mailing list > > openwrt-devel@lists.openwrt.org > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
