Hi, sorry your email got lost somehow on my end... And the machine hosting mailing list is down at the moment it seems.
here is the info: root@router:~# cat /tmp/sysinfo/* wndr4300 NETGEAR WNDR3700v4/WNDR4300 thanks, -paul On Sat, 2014-07-19 at 14:52 -0400, Paul Blazejowski wrote: > John, > > any update on this issue? i strongly believe that the hard-coded > wndr4300 string somewhere in the source is the culprit of the problem > since the wndr3700v4 board_detection is identified as wndr4300 thus the > sysupgrade works for 4300 but not for 3700v4. > > Regards, > -paul > > On Tue, 2014-06-24 at 23:15 +0200, John Crispin wrote: > > > > On 24/06/2014 22:43, Paul Blazejowski wrote: > > > i get "The uploaded image file does not contain a supported format. > > > Make sure that you choose the generic image format for your > > > platform." from web interface. > > > > > > this is what i have: > > > > > > -rw-r--r-- 1 diffie diffie 8919040 2014-06-24 15:58 > > > bin/ar71xx/openwrt-ar71xx-nand-wndr3700v4-squashfs-sysupgrade.tar > > > > > > should i push it from shell using sysupgrade script? > > > > > > > it will work from shell, i will look into why it fails via webui. > > > > > > > > > > > > > thanks! > > > > > > > > > On Tue, 2014-06-24 at 22:32 +0200, John Crispin wrote: > > >> > > >> On 24/06/2014 22:25, Paul Blazejowski wrote: > > >>> Hi again, > > >>> > > >>> thanks for the tftp fix, flushing just became so much faster > > >>> and easier. > > >>> > > >>> Tested trunk r41336 after your jffs2 fix and the image boots > > >>> fine, restored my configuration changes, rebooted the router > > >>> and all changes are saved now. I will post the working dmesg to > > >>> the ticket at https://dev.openwrt.org/ticket/16840 but it is > > >>> safe to say that you can close it ;-) now. > > >>> > > >>> Sysupgrade image(s) for 3700v4 and 4300 do not work now, guess > > >>> this is next on the list... > > >>> > > >> > > >> i tested 4300 and it works. you need to use the > > >> *-ubi-sysupgrade.tar file. > > >> > > >> > > >> > > >> > > >>> Thank you, -paul > > >>> > > >>> On Tue, 2014-06-24 at 20:18 +0200, John Crispin wrote: > > >>>> > > >>>> On 24/06/2014 19:05, Paul Blazejowski wrote: > > >>>>> John, > > >>>>> > > >>>>> Yes i use the reset with pin and from there i tftp the > > >>>>> original firmware from netgear after that i go to the gui > > >>>>> and upload the open-wrt image because the router will not > > >>>>> accept the wndr3700v4 image (there's a cosmetic fix for > > >>>>> that, i created a patch that someone from the forums has > > >>>>> sent months ago to this list but it was never accepted...) > > >>>>> https://dev.openwrt.org/ticket/16840 > > >>>>> > > >>>>> With that patch tftp'ing the > > >>>>> openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works > > >>>>> without need to flash the original firmware. > > >>>>> > > >>>>> If there's another method that can be used to flash the > > >>>>> image(s) please let me know i would want to try any > > >>>>> alternative ways of flashing and could learn a thing or two > > >>>>> in the process as well ;-) > > >>>>> > > >>>>> Thank you, -paul > > >>>> > > >>>> > > >>>> Hi, > > >>>> > > >>>> i just pushed the V vs v fix and another fix that removes > > >>>> the jffs2 magic. i think this might have been the cause of > > >>>> the problems. please retry with current trunk and let me know > > >>>> if the problem is gone or still there > > >>>> > > >>>> John _______________________________________________ > > >>>> openwrt-devel mailing list openwrt-devel@lists.openwrt.org > > >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > >>>> > > >>>> > > >>>> > > >>>> > > _______________________________________________ openwrt-devel > > >>>> mailing list openwrt-devel@lists.openwrt.org > > >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > >> > > >>>> > > _______________________________________________ > > >> openwrt-devel mailing list openwrt-devel@lists.openwrt.org > > >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
signature.asc
Description: This is a digitally signed message part
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel