On 25/06/2014 08:02, Paul Blazejowski wrote: > On Wed, 2014-06-25 at 07:57 +0200, John Crispin wrote: >> Hi, >> >> can someone with a 3700v4 run "cat /tmp/sysinfo/*" on a 3700 ? >> >> the sysupgrade fails because the board id is not added yet in >> the upgrade script. however i fail to figure out what id it gets >> from the ar71xx.sh script >> >> John >> > > Good morning John > > on my 3700v4 i get this: > > root@router:~# cat /tmp/sysinfo/* wndr4300 NETGEAR > WNDR3700v4/WNDR4300 > > hope this helps! > > -paul > >
and which sysupgrade file fails in luci ? if the id is 4300 then you should simply use the 4300 tar file for luci sysupgrade John > >> On 25/06/2014 06:27, Adam Kuklycz wrote: >>> Hi all, >>> >>> I've flashed my Netgear WNDR4300 with trunk r41336 and have run >>> a series of tests. >>> >>> Everything looks great! I can restore backed up settings, I >>> can configure it from scratch too should I desire. >>> >>> Sysupgrade works fine on my WNDR4300 via the web UI. Paul if >>> you're still having issues with this on your WNDR3700v4 it may >>> be specific to that model; I do not have one of these to test >>> on unfortunately. But sysupgrade on the WNDR4300 works and >>> works well. All settings are kept when sysupgrading too. >>> >>> If it helps Paul out I can email him my config file, write me >>> directly for it; that should eliminate any mistakes that have >>> been overlooked. Easy to do. >>> >>> Will run the router for a few hours on the test bench and do >>> some traffic through it, should that play nice then it's >>> problems resolved on my end :) >>> >>> Cheers Adam >>> >>> >>> On 25/06/14 13:14, Paul Blazejowski wrote: >>>> Adam, >>>> >>>> what do you know? hehehe when one sleeps another fixes >>>> things ;-) >>>> >>>> so far so good, my router has been up for few hours without >>>> problems... there's still issue with the sysupgrade image >>>> that John is already aware of ... and may have a fix for us >>>> to test ... one fix at a time they say. >>>> >>>> glad we made much progress today! >>>> >>>> thank you all! >>>> >>>> >>>> On Wed, 2014-06-25 at 00:07 +0000, Adam Kuklycz wrote: >>>>> Geez, it must be true that you should only sleep when >>>>> you're dead...damn Aussie time zones... >>>>> >>>>> I'll test with latest trunk as well & will confirm. But >>>>> looks promising! >>>>> >>>>> >>>>> >>>>> -----Original Message----- From: openwrt-devel >>>>> [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf >>>>> Of Paul Blazejowski Sent: Wednesday, 25 June 2014 6:27 AM >>>>> To: John Crispin Cc: openwrt-devel@lists.openwrt.org >>>>> Subject: Re: [OpenWrt-Devel] [BUG] NAND sysupgrade broke >>>>> ubifs on Netgear WNDR3700v4/4300. >>>>> >>>>> sorry i meant https://dev.openwrt.org/ticket/16803 the >>>>> previous one is closed for good ;-) >>>>> >>>>> >>>>> On Tue, 2014-06-24 at 16:25 -0400, Paul Blazejowski wrote: >>>>>> Hi again, >>>>>> >>>>>> thanks for the tftp fix, flushing just became so much >>>>>> faster and easier. >>>>>> >>>>>> Tested trunk r41336 after your jffs2 fix and the image >>>>>> boots fine, restored my configuration changes, rebooted >>>>>> the router and all changes are saved now. I will post the >>>>>> working dmesg to the ticket at >>>>>> https://dev.openwrt.org/ticket/16840 but it is safe to >>>>>> say that you can close it ;-) now. >>>>>> >>>>>> Sysupgrade image(s) for 3700v4 and 4300 do not work now, >>>>>> guess this is next on the list... >>>>>> >>>>>> Thank you, -paul >>>>>> >>>>>> On Tue, 2014-06-24 at 20:18 +0200, John Crispin wrote: >>>>>>> On 24/06/2014 19:05, Paul Blazejowski wrote: >>>>>>>> John, >>>>>>>> >>>>>>>> Yes i use the reset with pin and from there i tftp >>>>>>>> the original firmware from netgear after that i go to >>>>>>>> the gui and upload the open-wrt image because the >>>>>>>> router will not accept the wndr3700v4 image (there's >>>>>>>> a cosmetic fix for that, i created a patch that >>>>>>>> someone from the forums has sent months ago to this >>>>>>>> list but it was never accepted...) >>>>>>>> https://dev.openwrt.org/ticket/16840 >>>>>>>> >>>>>>>> With that patch tftp'ing the >>>>>>>> openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works >>>>>>>> without need to flash the original firmware. >>>>>>>> >>>>>>>> If there's another method that can be used to flash >>>>>>>> the image(s) please let me know i would want to try >>>>>>>> any alternative ways of flashing and could learn a >>>>>>>> thing or two in the process as well ;-) >>>>>>>> >>>>>>>> Thank you, -paul >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> i just pushed the V vs v fix and another fix that >>>>>>> removes the jffs2 magic. i think this might have been >>>>>>> the cause of the problems. please retry with current >>>>>>> trunk and let me know if the problem is gone or still >>>>>>> there >>>>>>> >>>>>>> John _______________________________________________ >>>>>>> openwrt-devel mailing list >>>>>>> openwrt-devel@lists.openwrt.org >>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>>>> >>>>>>> >> >>>>>>> _______________________________________________ >>>>>> openwrt-devel mailing list >>>>>> openwrt-devel@lists.openwrt.org >>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>>> >>>>>> >> >>>>>> _______________________________________________ >>>>> openwrt-devel mailing list openwrt-devel@lists.openwrt.org >>>>> >>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >>>>> >> >>>>> _______________________________________________ >>> openwrt-devel mailing list openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>> >> >>> _______________________________________________ >> openwrt-devel mailing list openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> >> _______________________________________________ openwrt-devel >> mailing list openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel