Well, it's a good idea. But I don't know how to create a wiki page. QIhoo 360 C301 (http://luyou.360.cn/parameter.html, Simplified Chinese ONLY), has two 16M flash. The first flash is full functional, and the second has just a backup firmware. U-boot will boot into the second flash when it believes firmware on the first is broken.
To flash openwrt, disconnect power source, hold down the reset button and power on, keep holding reset button for about 20 seconds. Go to http://192.168.1.1 and upload the openwrt firmware to flash. To flash back to OEM firmware from openwrt, use the same instructions above and upload a decrypted OEM firmware which can be founded somewhere by a search engine. There is also some tools for decrypting OEM firmware (no tool for encrypting yet), but they are not part of openwrt, so it is not necessary to discuss here. On Mon, Sep 22, 2014 at 2:01 PM, Yousong Zhou <yszhou4t...@gmail.com> wrote: >>> On 2014/9/20 17:18, swigger wrote: >>>> Openwrt recently adds Qihoo [NYSE:QIHU] C301 router support. >>>> However, this router has a backup firmware in the second flash and the >>>> current trunk can only boot 3 times before u-boot boots into that backup >>>> firmware. This is a stratgy for unbricking. >>>> >>>> This patch makes u-boot happy. >>>> > > I do not have a device of this, but looks like it has some quirks that > needs to be taken care of. How about creating a wiki page for this > and documenting your findings about the backup firmware, instructions > on how to flash OpenWrt from OEM and to restore to OEM firmware, etc? > > > Regards. > > yousong _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel