Just got the device... Wow On 22 September 2014 15:47, swigger <swig...@gmail.com> wrote: > Well, it's a good idea. > But I don't know how to create a wiki page. > > QIhoo 360 C301 (http://luyou.360.cn/parameter.html, Simplified Chinese > ONLY), has two 16M flash. > The first flash is full functional, and the second has just a backup firmware. > U-boot will boot into the second flash when it believes firmware on > the first is broken. >
Yeah, when (image1trynum > imagemaxtry) with imagemaxtry defaults to 3, and in this case, image1status would be set to 1 to mark it as not viable. > To flash openwrt, disconnect power source, hold down the reset button > and power on, keep holding reset button for about 20 seconds. > Go to http://192.168.1.1 and upload the openwrt firmware to flash. > Good. > To flash back to OEM firmware from openwrt, use the same instructions > above and upload a decrypted OEM firmware which can be founded > somewhere by a search engine. > How about flashing back through OpenWrt's sysupgrade process? > There is also some tools for decrypting OEM firmware (no tool for > encrypting yet), but they are not part of openwrt, so it is not > necessary to discuss here. You mean seama? That code is already in OpenWrt. I think I have a better patch for working with this U-Boot. Please hold on for a moment. Regards yousong _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel