Sylwester Petela <sscapi <at> gmail.com> writes: > > > W dniu 2015-05-05 o 09:31, Johannes Berg pisze: > > On Tue, 2015-05-05 at 09:28 +0200, Sylwester Petela wrote: > > > >>>> [ 458.772000] DSL[00]: WARNING - Data Path counters are not supported > >>>> for the FE! > >>> That seems pretty harmless - the driver code is really really ugly > >>> though. Probably should just remove the message. > >> Cannot find witch function this message is referring to, need to > >> investigate more. > > I found it in Martin's drv_dsl_cpe_api_vrx repository. > > > >>>> vectoring and ReTx works acording to friend but system log shows some > >>>> errors as well like on my ADSL line but not so many. > >>> What firmware/driver combination was this with? > >> xcpe_567517_562301.bin: VDSL over ISDN incl. vectoring support for > >> VRX200, version: 6.7.5 | ADSL Annex A for VRX200, version: 6.2.3 > >> > >> 4.15.2 -app/control; 1.4.5 -mei > > Ok, I'll give that a try as soon as I've removed this from my productive > > env. > > > > Or perhaps I'll just put another image on a separate extroot since I > > have extroot setup anyway. > > > >> Yes slow but why ? Because of load or because of hardware, Zyxel on > >> stock openwrt driver can achieve 80Mbps without that much load. > > Not sure, perhaps the CPU is just slow? > > > > johannes > > > > Anyone got a clue how to disable warnings ? Tried to disable PM counters > but without any luck. > > [ 47.436000] DSL[00]: PM NE processing out of Poll Cycle! > [ 47.636000] DSL[00]: Unsupported message with MsgID=0x0245! > [ 47.640000] DSL[00]: Unsupported message with MsgID=0x1C44! > [ 47.644000] DSL[00]: WARNING - Saving PM Channel Counters for FE are > not supported! > [ 47.652000] DSL[00]: WARNING - Saving PM Line Performance Counters > for FE are not supported! > [ 70.760000] DSL[00]: MEI_InternalXtmSwhowtimeEntrySignal(nFast=0, > nIntl=928000) > [ 70.768000] enter showtime, cell rate: 0 - 2188, 1 - 2188, xdata > addr: 0x86d10000 > [ 70.784000] enter showtime, cell rate: 0 - 2188, 1 - 2188, xdata > addr: 0x86d10000 > [ 70.792000] DSL[00]: WARNING - Data Path counters are not supported > for the FE! > [ 71.792000] DSL[00]: WARNING - FE line failures retrieving not > supported by the FW in ADSL mode! > [ 72.436000] pppoe-wan: renamed from ppp0 > [ 72.800000] DSL[00]: WARNING - FE line failures retrieving not > supported by the FW in ADSL mode! > (...) > [ 106.792000] DSL[00]: WARNING - Data Path counters are not supported > for the FE! > [ 107.064000] DSL[00]: WARNING - FE line failures retrieving not > supported by the FW in ADSL mode! > [ 108.072000] DSL[00]: WARNING - FE line failures retrieving not > supported by the FW in ADSL mode! >
Not sure if this helps, but some modules seem to accept debug_level parameter at load. In GPL tarbal for W8980 (http://www.tp- link.com/resources/gpl/GPL_TD-W8980.tar.gz) i found this line: #insmod /lib/modules/drv_dsl_cpe_api.ko debug_level=3 Also, there are references in code to this: https://github.com/xdarklight/lib_ifxos/search?q=debug_level Also, using binwalk, I was able to extract dsl firmware from latest W9980 firmware update (TD-W9980_V1_150507). filename: xcpe_574306_571801.bin version: 5.7.4.3.0.6-5.7.1.8.0.1 sha1sum: f8a13f16f5ead64bb0d2d551fbef8f1a838322f7 filesize: 923152 Firmware1: PLATFORM: 5 PLATFORM_STR: VRX200 APPLICATION_TYPE: 6 APPLICATION_TYPE_STR: VDSL over IDSN VERSION_STR: 7.4.3 RELEASE_STATUS: 0 RELEASE_STATUS_STR: Release Firmware2: PLATFORM: 5 PLATFORM_STR: VRX200 APPLICATION_TYPE: 1 APPLICATION_TYPE_STR: ADSL Annex A VERSION_STR: 7.1.8 RELEASE_STATUS: 0 RELEASE_STATUS_STR: Release Might be useful as it seems to be newest version reported so far. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
