-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Isn't this normally called the "OYE-0001" ? not "OY-0001" ? The website and all literature I've seen uses the "OYE-0001" name...
Regardless, in many places, you have not followed the existing alphabetical order. LiWeijian <younfa...@hotmail.com> wrote: > From: Tom Deng <2579131...@qq.com> > > Adding support for OY-0001 Wireless Router. > OY-0001 is a wireless router made by oyewifi.com. Below is the details: > MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN. > Signed-off-by: Tom Deng <2579131...@qq.com> > --- > diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds > b/target/linux/ramips/base-files/etc/board.d/01_leds > index 545bd70..fe3a79d 100755 > --- a/target/linux/ramips/base-files/etc/board.d/01_leds > +++ b/target/linux/ramips/base-files/etc/board.d/01_leds > @@ -238,6 +238,10 @@ case $board in > set_wifi_led "zbtlink:blue:air" > set_usb_led "zbtlink:blue:usb" > ;; > + oy-0001) > + ucidef_set_led_default "power" "power" "oy:green:power" "1" > + set_wifi_led "oy:green:wifi" > + ;; > wr8305rt) > ucidef_set_led_default "power" "power" "wr8305rt:sys" "1" > set_usb_led "wr8305rt:usb" > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network > b/target/linux/ramips/base-files/etc/board.d/02_network > index bc1fc01..9fb3535 100755 > --- a/target/linux/ramips/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/base-files/etc/board.d/02_network > @@ -139,6 +139,7 @@ ramips_setup_interfaces() > mzk-750dhp | \ > whr-300hp2 | \ > whr-600d | \ > + oy-0001 | \ > wsr-600 | \ > wsr-1166 | \ > wt1520 | \ > @@ -283,6 +284,11 @@ ramips_setup_macs() > wan_mac=$(mtd_get_mac_binary devdata 7) > ;; > > + oy-0001) > + lan_mac=$(mtd_get_mac_binary factory 40) > + wan_mac=$(mtd_get_mac_binary factory 46) > + ;; > + > w306r-v20) > lan_mac=$(cat /sys/class/net/eth0/address) > wan_mac=$(macaddr_add "$lan_mac" 5) > diff --git a/target/linux/ramips/base-files/lib/ramips.sh > b/target/linux/ramips/base-files/lib/ramips.sh > index d2a1856..3d40ab9 100755 > --- a/target/linux/ramips/base-files/lib/ramips.sh > +++ b/target/linux/ramips/base-files/lib/ramips.sh > @@ -400,6 +400,9 @@ ramips_board_detect() { > *"Zbtlink ZBT-WA05") > name="zbt-wa05" > ;; > + *"OY-0001") > + name="oy-0001" > + ;; > *"ZBT WR8305RT") > name="wr8305rt" > ;; > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh > b/target/linux/ramips/base-files/lib/upgrade/platform.sh > index cedd62b..8f45a84 100755 > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh > @@ -116,6 +116,7 @@ platform_check_image() { > wr6202 |\ > wr8305rt |\ > wrtnode |\ > + oy-0001 |\ > wt1520 |\ > wt3020 |\ > x5 |\ > diff --git a/target/linux/ramips/dts/OY-0001.dts > b/target/linux/ramips/dts/OY-0001.dts > new file mode 100644 > index 0000000..48b7099 > --- /dev/null > +++ b/target/linux/ramips/dts/OY-0001.dts > @@ -0,0 +1,123 @@ > +/dts-v1/; > + > +/include/ "mt7620a.dtsi" > + > +/ { > + compatible = "ralink,mt7620a-soc"; > + model = "OY-0001"; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + }; > + > + palmbus@10000000 { > + gpio2: gpio@660 { > + status = "okay"; > + }; > + > + gpio3: gpio@688 { > + status = "okay"; > + }; > + > + spi@b00 { > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "w25q128"; > + reg = <0 0>; > + linux,modalias = "m25p80", "w25q128"; > + spi-max-frequency = <10000000>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0 0x30000>; > + read-only; > + }; > + > + partition@30000 { > + label = "u-boot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@40000 { > + label = "factory"; > + reg = <0x40000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0xfb0000>; > + }; > + > + }; > + }; > + }; > + > + pinctrl { > + state_default: pinctrl0 { > + gpio { > + ralink,group = "i2c", "uartf", "rgmii1", > "rgmii2", "wled", "nd_sd"; > + ralink,function = "gpio"; > + }; > + }; > + }; > + > + ethernet@10100000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&ephy_pins>; > + > + ralink,port-map = "llllw"; > + }; > + > + gsw@10110000 { > + ralink,port4 = "ephy"; > + }; > + > + wmac@10180000 { > + ralink,mtd-eeprom = <&factory 0>; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + powerled { > + label = "oy:green:power"; > + gpios = <&gpio0 9 1>; > + }; > + wifiled { > + label = "oy:green:wifi"; > + gpios = <&gpio3 0 1>; > + }; > + }; > + > + sdhci@10130000 { > + status = "okay"; > + }; > + > + ehci@101c0000 { > + status = "okay"; > + }; > + > + ohci@101c1000 { > + status = "okay"; > + }; > + > + pcie@10140000 { > + status = "okay"; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + #address-cells = <1>; > + #size-cells = <0>; > + poll-interval = <20>; > + s1 { > + label = "reset"; > + gpios = <&gpio0 1 1>; > + linux,code = <0x198>; > + }; > + }; > +}; > diff --git a/target/linux/ramips/image/Makefile > b/target/linux/ramips/image/Makefile > index 0c28216..2fe5fdd 100644 > --- a/target/linux/ramips/image/Makefile > +++ b/target/linux/ramips/image/Makefile > @@ -866,6 +866,7 @@ Image/Build/Profile/DIR-810L=$(call > BuildFirmware/CustomFlash/$(1),$(1),dir-810l > na930_mtd_size=20971520 > Image/Build/Profile/NA930=$(call > BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) > Image/Build/Profile/MZK-750DHP=$(call > BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) > +Image/Build/Profile/OY-0001=$(call > BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001) > Image/Build/Profile/Y1=$(call > BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1) > Image/Build/Profile/Y1S=$(call > BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S) > Image/Build/Profile/MLW221=$(call > BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221) > @@ -899,6 +900,7 @@ define Image/Build/Profile/Default > $(call Image/Build/Profile/WHR1166D,$(1)) > $(call Image/Build/Profile/MZK-750DHP,$(1)) > $(call Image/Build/Profile/NA930,$(1)) > + $(call Image/Build/Profile/OY-0001,$(1)) > $(call Image/Build/Profile/Y1,$(1)) > $(call Image/Build/Profile/Y1S,$(1)) > $(call Image/Build/Profile/MLW221,$(1)) > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel - -- Sent using Mailpile, Free Software from www.mailpile.is -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAEBAgAGBQJVn6w8AAoJEBmotQ/U1cr2IxwQAJcAJAAU3Xxq13eDCZ7+DaV/ OTV1SusODWC++4eJ4HxaDFJ6r4RKVo/0B5f8i70HLz+I2r4dWM60E8J7shWoaSsv K+aV/pUj50klZuzAXpekDitezYSRi2m7l40IcMrF29x+PZYzr6bdeiJOp+BkTrKh oo7NN9QykgMwmZy+LoKdgoGtwgIWa1oxZHY1ppI2CCIbGiis+eeusyqp6kPvLUee y4dzGTFk3oend3LP1DGpW8MmOXFVaCksQIs3RhTGgc2IUQ0dpIpbDYVA3MnaRq95 s824pG++vE0iCnWrpK9ij518GFvRvhn4kTaE6Xy0T/LmgDKq4DGpCZ3en0dVYzeJ Ln/FyIwvuALFkPEr2WqWXEAvPIPyuUxViOXpL5XRhGQ1Grnhzl0vwMRzKXq6VBus QvWVzREupNygD+3iHcJ93zOJFSF+AuvlU5JRS+88Lg8URmX8gEC+R7hulO8Cs2Uc 0TXg1tYmoUS3AJFZWUebQIlvX66gXHYZs+jTMM1zHRSrZ0Xn6DVUFEQ3oxcuhl2k 12/sGJusstgMyT30HLPLUHBb7fuw7T7f3149uyi4c8L5WYuzo+fNcbSFckBcP4Cw jTSjr960T1fBfIXTn/Mj7zlDsk3ntzImNg0uwgohqt2SjLUOR20zPhfrgGXT4fN5 T7K9ToSMM4QcGLaSx0ry =Qc6u -----END PGP SIGNATURE-----
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel