On 06/28/2015 09:16 PM, N.Leiten wrote: > Hi. > > There's some general problem in hostapd configuration for several devices was > observed. In vanilla trunk versions of openwrt I got nearly 40-45Mbit/s speed > on Ralink RT5350 based devices and Atheros AR71xx platform (tp-link wr841nd). > The problem was in /var/run/hostapd-phy0.conf. It seems it is not enough just > set 'wmm_enable=1' to actually enable WME/WMM on interface, it also need all > WMM related keys be set. So I just added it with standart definitions from > hostapd.conf to /lib/netifd/hostapd.sh. > > As a result I got full 100Mbit/s on AR71XX platform and 70-80Mbit on Ralink. > I think it is good performance improvement at this moment. >
Hi, this does not seem to make any difference in CC with a tp-link wdr3600.. > Patch was created against current trunk version. > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
