Sorry, I must admit that there was a mistake in my tests. Patch already declined.
In email dated Вторник - 14 июля 2015 22:43:36 user Daniel Petre wrote: > On 06/28/2015 09:16 PM, N.Leiten wrote: > > Hi. > > > > There's some general problem in hostapd configuration for several devices > > was observed. In vanilla trunk versions of openwrt I got nearly 40-45Mbit/s > > speed on Ralink RT5350 based devices and Atheros AR71xx platform (tp-link > > wr841nd). The problem was in /var/run/hostapd-phy0.conf. It seems it is not > > enough just set 'wmm_enable=1' to actually enable WME/WMM on interface, it > > also need all WMM related keys be set. So I just added it with standart > > definitions from hostapd.conf to /lib/netifd/hostapd.sh. > > > > As a result I got full 100Mbit/s on AR71XX platform and 70-80Mbit on > > Ralink. I think it is good performance improvement at this moment. > > > > Hi, this does not seem to make any difference in CC with a tp-link wdr3600.. > > > Patch was created against current trunk version. > > > > > > _______________________________________________ > > openwrt-devel mailing list > > openwrt-devel@lists.openwrt.org > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
