On 19/09/2015 11:27, Nerijus Baliunas wrote: > Hello, > > it is similar to NBG-419N but has Atheros AR8316 4+1 GbE switch. I enabled > CONFIG_AR8216_PHY=y in target/linux/ramips/rt305x/config-3.18, rebuilt and > loaded openwrt-ramips-rt305x-nbg-419n-initramfs-uImage.bin to SDRAM via TFTP. > > Now /sys/bus/mdio_bus/drivers/Atheros AR8216!AR8236!AR8/ exists, but > # swconfig list > Found: switch0 - rt305x > > How can I make switch work? > > I found similar problem https://forum.openwrt.org/viewtopic.php?id=49276 > > Regards, > Nerijus
Hi rt305x has a rgmii that the switch connects to. however we dont have support in the driver for that rgmii port. you will need to first atch the driver to support the rgmii interface and then hook up the switch driver. John > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel