On Sat, 19 Sep 2015 12:11:06 +0200 John Crispin <blo...@openwrt.org> wrote:
> > it is similar to NBG-419N but has Atheros AR8316 4+1 GbE switch. I enabled > > CONFIG_AR8216_PHY=y in target/linux/ramips/rt305x/config-3.18, rebuilt and > > loaded openwrt-ramips-rt305x-nbg-419n-initramfs-uImage.bin to SDRAM via > > TFTP. > > > > Now /sys/bus/mdio_bus/drivers/Atheros AR8216!AR8236!AR8/ exists, but > > # swconfig list > > Found: switch0 - rt305x > > > > How can I make switch work? > > > > I found similar problem https://forum.openwrt.org/viewtopic.php?id=49276 > > rt305x has a rgmii that the switch connects to. however we dont have > support in the driver for that rgmii port. you will need to first atch > the driver to support the rgmii interface and then hook up the switch > driver. drivers/net/phy/ar8216.c already has if (priv->phy->interface == PHY_INTERFACE_MODE_RGMII) Is it something similar? How can I add support for rt305x rgmii? Regards, Nerijus _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel