Hi, On Wed, Dec 10, 2014 at 01:40:42PM -0700, Davey Hutchison wrote: > Fix pll_1000 value for eth0. Traffic would not flow from the eth0 interface. > The new PLL enables delay, use ath79_setup_ar934x_eth_cfg to also enable > AR934X_ETH_CFG_RXD_DELAY.
I can confirm that this patch works on CC on a Routerboard 951G-2HnD [http://wiki.openwrt.org/toh/mikrotik/rb951g_2hnd] Without the patch, CC installs fine, but the switch does not work (traffic seems to be able to flow out of the router, but nothing comes in). This is a router with the "new" chipset (AR9344 rev. 3). Is it possible to pull this patch, at least to trunk? Having it in CC would also be nice if another CC release is planned. Thanks, Baptiste > Signed-off-by: Davey Hutchison <dhutchi...@bluemesh.net> > > --- target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c > +++ target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c > @@ -199,6 +199,7 @@ > return; > > ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | > + AR934X_ETH_CFG_RXD_DELAY | > AR934X_ETH_CFG_SW_ONLY_MODE); > > ath79_register_mdio(0, 0x0); > @@ -209,6 +210,7 @@ > ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); > ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; > ath79_eth0_data.phy_mask = BIT(0); > + ath79_eth0_pll_data.pll_1000 = 0x3e000000; > > ath79_register_eth(0); > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
pgp1HSEBw8gjJ.pgp
Description: PGP signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel