Hi, Am Wednesday 23 March 2016, 13:17:32 schrieb Dieter Pfeuffer: > Signed-off-by: Dieter Pfeuffer <dieter.pfeuf...@men.de> > --- > target/linux/mpc85xx/base-files/etc/fw_env.config | 22 > ++++++++++++++++++++++ 1 file changed, 22 insertions(+) > create mode 100644 target/linux/mpc85xx/base-files/etc/fw_env.config > > diff --git a/target/linux/mpc85xx/base-files/etc/fw_env.config > b/target/linux/mpc85xx/base-files/etc/fw_env.config new file mode 100644 > index 0000000..1780f22 > --- /dev/null > +++ b/target/linux/mpc85xx/base-files/etc/fw_env.config > @@ -0,0 +1,22 @@ > +# Configuration file for fw_(printenv/setenv) utility. > +# Up to two entries are valid, in this case the redundant > +# environment sector is assumed present. > +# Notice, that the "Number of sectors" is not required on NOR and > SPI-dataflash. +# Futhermore, if the Flash sector size is ommitted, this > value is assumed to +# be the same as the Environment size, which is valid > for NOR and SPI-dataflash + > +# NOR example > +# MTD device name Device offset Env. size Flash sector size > Number of > sectors > +/dev/mtd1 0x0000 0x2000 0x2000
I think it would be better to make use of ubootenv_add_uci_config and the other infrastructure and create a new file in package/boot/uboot-envtools/files Regards, mhei > +#/dev/mtd2 0x0000 0x4000 0x4000 > + > +# MTD SPI-dataflash example > +# MTD device name Device offset Env. size Flash sector size > Number of > sectors +#/dev/mtd5 0x4200 0x4200 > +#/dev/mtd6 0x4200 0x4200 > + > +# NAND example > +#/dev/mtd0 0x4000 0x4000 0x20000 > 2 > + > +# Block device example > +#/dev/mmcblk0 0xc0000 0x20000 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel