Hello Any clue if these fixes are going to make it into Openwrt / LEDE 18.06 . So I can begin testing.
Thanks, Danny -----Original Message----- From: Sven Eckelmann [mailto:sven.eckelm...@openmesh.com] Sent: Friday, April 13, 2018 4:34 AM To: openwrt-devel@lists.openwrt.org Cc: Daniel Golle <dan...@makrotopia.org>; lede-...@lists.infradead.org; Daniel Hernandez <d.hernan...@cititechs.com> Subject: Re: [OpenWrt-Devel] [PATCH] mac80211: pass hostapd control socket to mesh-mode supplicant On Freitag, 13. April 2018 01:41:31 CEST Daniel Golle wrote: > Unlike when operating in Ad-Hoc mode, we apparently need to pass the > hostapd control socket interface to wpa_supplicant when using 802.11s > mesh mode. > > There also seems to still be something wrong with the logic setting > channel and (v)htmode parameters when using AP + mesh... I haven't tested the current state but this was basically breaking encrypted mesh + AP (AP never came up). Problem was the code (OpenWrt specific) in wpa_supplicant which called STOP_AP via this socket. Kind regards, Sven _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/listinfo/openwrt-devel