On 11/12/21 10:00 PM, Sander Vanheule wrote:
Hi,
On Sun, 2021-10-03 at 15:53 +0900, INAGAKI Hiroshi wrote:
[...]
INAGAKI Hiroshi (3):
realtek: enable pca953x driver for target
realtek: enable gpio-restart driver in target
realtek: add support for Panasonic Switch-M8eG PN28080K
target/linux/realtek/config-5.10 | 4 +
target/linux/realtek/config-5.4 | 4 +
.../rtl8380_panasonic_m8eg-pn28080k.dts | 103 ++++++++
.../rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi | 216 +++++++++++++++++
.../rtl8380_panasonic_m8eg-pn28080k.dts | 107 +++++++++
.../rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi | 220 ++++++++++++++++++
target/linux/realtek/image/Makefile | 10 +
7 files changed, 664 insertions(+)
create mode 100644
target/linux/realtek/dts-5.10/rtl8380_panasonic_m8eg-pn28080k.dts
create mode 100644
target/linux/realtek/dts-5.10/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi
create mode 100644
target/linux/realtek/dts-5.4/rtl8380_panasonic_m8eg-pn28080k.dts
create mode 100644
target/linux/realtek/dts-5.4/rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi
I guess this is more a question for the maintainers: Since the realtek target
now uses the
5.10 kernel in master, does it still make sense to add support for 5.4? Hiroshi
has
backported the upstream drivers for 5.10 (thanks again!), so both kernel
version now have
different quirks. Personnaly, I would prefer not to have to put any energy in
5.4 anymore.
The realtek target already has KERNEL_PATCHVER set to 5.10 now. You do
not have to add support for kernel 5.4 in your patches any more, if you
want to it is fine with me, but we will probability delete the support
for kernel 5.4 in 1 or 2 months anyway.
If you need special workarounds for kernel 5.4 I would suggest to go
with kernel 5.10 only.
@Hiroshi I added some of the GPIO patches from Sander, could you please
rebase your patch on top of that.
Hauke
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
