#17839: Reboot command causes sometimes hanging router with TL-WDR3600 (HW V1.5)
and TL-WDR4300 (HW V1.7)
--------------------------+-----------------------------------
Reporter: michaeluray | Owner: developers
Type: defect | Status: new
Priority: high | Milestone: Barrier Breaker 14.07
Component: base system | Version: Barrier Breaker 14.07
Resolution: | Keywords: reboot
--------------------------+-----------------------------------
Comment (by ctbenergy):
Replying to [comment:10 bittorf@…]:
> Replying to [comment:9 ctbenergy]:
> > I performed a couple of reboot tests from ssh terminal and most of
time it cannot restart.
> > When I issue a reboot from terminal I can see that all leds goes down
- only power is on.
> > But the router did not reach that state of the boot process that sys
led starts to blink.
>
> how long did you wait? 180 sec?
> if you have a serial console, please use the debug-mode 4 for procd and
post the output during shutdown
see attachment "openwrt r42625.log" for serial console log with debug-mode
4
openwrt r42625 build from source
reboot with cronjob every 5 minutes
after 4 reboots only power LED
--
Ticket URL: <https://dev.openwrt.org/ticket/17839#comment:13>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
